VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1978 Honda CB750F — Pignons et couronnes

The sprocket choices for the 1978 Honda CB750F include a fourteen-tooth front and a forty-three-tooth rear, both described for 630 chain. Count the fitted teeth and check the chain before ordering, then assess the separately listed rear mounting hardware.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Pignons et couronnes

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 rear sprocket washer set 94108-17000

1969-78 Honda CB750 Rear Sprocket Washer Set

$9.50 USD
29-7012
Replace your rear sprocket lock washers with this Rear Sprocket Tongued Lock Washer 2-pack, replacing OEM #94108-17000.Key Features• Rear sprocket tongued lock washer, 2-pack•...
Honda CB750A CB750F CB750K rear sprocket bolt and nut set 90128-341-000

1972-78 Honda CB750A / CB750F / CB750K Rear Sprocket Bolt & Nut Set ~ Replaces 90128-341-000

$13.95 USD
29-7023
Restore your rear sprocket hardware with this Rear Sprocket Stud Bolt (12 x 54) & Nut Set. Set includes 4 stud bolts and 4...
Nouveau
Honda CB750 primary chain tensioner

1969-78 Honda CB750 Primary Chain Tensioner ~ Genuine Honda Brand

$219.95 USD
99-5460
Upgrade or restore your classic Honda motorcycle with this Primary Chain Tensioner — a genuine Honda brand part engineered for correct fit and dependable...
Honda CB750F steel front sprocket 14 tooth x 630 23801-410-000

1977-78 Honda CB750F Steel Front Sprocket ~ 14 Tooth X 630 ~ Replaces 23801-410-000

$32.95 USD
23-0411
Replace your late-'70s CB750F Supersport front sprocket with this Steel Front Sprocket, 14 tooth, for 630 chain setup as came stock. Replaces OEM #23801-410-000.Please...
Honda CB750F steel rear sprocket 43 tooth x 630 type 41201-410-000

1977-78 Honda CB750F Steel Rear Sprocket ~ 43 Tooth X 630 Type ~ Replaces 41201-410-000

$64.95 USD
22-0318
Replace your late-'70s CB750F Supersport rear sprocket with this Steel Rear Sprocket, 43 tooth, for 630 chain setup as came stock. Replaces OEM #41201-410-000.Please...
Comparer

1978 Honda CB750F · Front & rear sprockets Buying guide

Verify teeth and chain type before choosing either sprocket

Both steel sprocket descriptions name the 1977–78 Supersport and a 630 setup. The rear lock-washer pack and stud/nut set are separate products; their contents should not be counted as included sprocket hardware.

Parts to consider

1977-78 Honda CB750F Steel Front Sprocket ~ 14 Tooth X 630 ~ Replaces 23801-410-000 Fourteen-tooth steel front sprocketSpecified for 630 chain and the 1977–78 CB750F, referencing 23801-410-000. The listing asks you to count the existing teeth and check chain length before ordering.Voir la pièce 1977-78 Honda CB750F Steel Rear Sprocket ~ 43 Tooth X 630 Type ~ Replaces 41201-410-000 Forty-three-tooth steel rear sprocketSpecified for the 1977–78 Supersport’s 630 setup, referencing 41201-410-000. Confirm the fitted rear tooth count and chain arrangement rather than assuming the motorcycle remains unchanged.Voir la pièce 1969-78 Honda CB750 Rear Sprocket Washer Set Rear sprocket lock washers, two-packThe tongued lock-washer package explicitly supplies two and references 94108-17000. It is separate from both the sprocket and the rear stud/nut set.Voir la pièce

Pièces connexes : Four rear sprocket studs and four nuts

Allow for changes already made to the motorcycle

The two sprocket listings describe a stock 630 setup for the 1977–78 CB750F, then expressly ask for a tooth count and chain-length check. Follow that comparison on the actual bike. Model year alone does not show whether an owner has already changed its chain or gearing.

Separate sprocket teeth from mounting hardware

The rear stud/nut set supplies four 12 × 54 studs and four nuts, while the tongued washer package supplies two washers. Neither product description bundles a sprocket. Compare the existing fasteners and the chosen replacement sprocket before deciding which of those additional hardware packages the job needs.

Front and rear sprocket selection questions

What tooth counts do the selected listings specify?

The front sprocket is fourteen teeth and the rear is forty-three teeth. Both descriptions identify 630 chain and the 1977–78 Supersport. Count the installed sprockets and check the chain before relying on those catalog specifications.

Are rear studs and lock washers included with a sprocket?

The sprocket descriptions do not name them as included. The separate stud/nut set supplies four studs and four nuts, and the lock-washer product supplies two tongued washers. Review each package independently when planning rear mounting work.

Does this selection establish a replacement chain length?

No chain length is specified by the selected sprocket descriptions. They ask you to check the fitted chain length and tooth counts before ordering, so establish that requirement from the actual arrangement rather than deriving it from model year alone.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1978 Honda CB750F

Votre panier

×