VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1978 Honda CB750F — Plaquettes, mâchoires, durites et tiges de frein

Pad and brake-hardware choices for the 1978 CB750F include Kevlar and sintered-metal sets, a genuine Honda three-way hose joint and smaller service pieces. Match the purchase to the part requiring attention. The two pad listings share stated dimensions and front-or-rear application for this model.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Plaquettes, mâchoires, durites et tiges de frein

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB550 CB500 CB450 front brake pipe 45128-323-020

Honda CB Front Brake Pipe ~ Replaces 45128-323-020

$17.09 USD
07-9971
Replace the front brake pipe on a wide range of '70s Hondas with this Front Brake Pipe, replacing OEM #45128-323-020. Approximately 8" total length,...
Honda CB900C CB750F front rear friction pad set 45105-410-305

1977-81 Honda CB900C / CB750F Front/ Rear Friction Pad Set ~ Replaces 45105-410-305

$29.95 USD
29-3547
Replace your CB750F Supersport or CB900C brake pads with this Brake Pad Set in Kevlar, 67 x 49.5 x 9.5mm, replacing OEM #45105-410-305 /...
Honda CB750 CB550 CB500 CB450 brake hose rubber grommet 45146-300-000

Honda CB Brake Hose Rubber Grommet ~ Replaces 45146-300-000

$4.61 USD
73-0091
Replace your brake hose grommet with this Brake Hose Rubber Grommet, the rubber grommet that attaches to the brake hose, replacing OEM #45146-300-000.Key Features•...
Honda CB900C CB750F front rear sintered metal friction pad set 45105-410-305

1977-81 Honda CB900C / CB750F Front/Rear Sintered Metal Friction Pad Set ~ Replaces 45105-410-305

$39.95 USD
29-3553
Upgrade your CB750F Supersport or CB900C brake pads to sintered metal with this Brake Pad Set, 67 x 49.5 x 9.5mm, replacing OEM #45105-410-305...
Honda CB1100 CB1000 CB900 CB750 brake rod pin 46503-371-000

Honda CB1100 / CB1000 / CB900 / CB750 Brake Rod Pin ~ Replaces 46503-371-000

$6.95 USD
29-7031
Replace your brake rod pin with this Brake Rod Pin, replacing OEM #46503-371-000.Key Features• Brake rod pin• Replaces OEM #46503-371-000• Honda part name: Pin,...
Nouveau
Honda CB750F Honda front brake hose three-way joint 45123-410-000

1977-78 Honda CB750F Genuine Honda Front Brake Hose Three-Way Joint ~ OEM 45123-410-000

$27.95 USD
99-5075
Upgrade or restore your classic Honda motorcycle braking system with this Genuine Honda Front Brake Hose Three‑Way Joint — precision‑engineered and quality made in...
Honda CB900 CB750 CB650 brake disc retaining nut pk 10 90309-357-000

Honda CB Brake Disc Retaining Nut Pk/10 ~ Replaces 90309-357-000

$6.50 USD
73-0937
Replace your brake disc retaining nuts with this Brake Disc Retaining Nut Pk/10, replacing OEM #90309-357-000.Key Features• Brake disc retaining nuts• Pack of 10•...
Comparer

1978 Honda CB750F · Pads & brake hardware Buying guide

Compare pad specifications and hose hardware

Choose between Kevlar and sintered-metal pad sets, then identify any separate hose-joint, hose-support or rear-linkage hardware needed for the repair.

Parts to consider

1977-81 Honda CB900C / CB750F Front/ Rear Friction Pad Set ~ Replaces 45105-410-305 Kevlar pad setKevlar pad set 29-3547, measuring 67 × 49.5 × 9.5 mm, is listed for front or rear discs on the 1977–78 CB750F.Voir la pièce 1977-81 Honda CB900C / CB750F Front/Rear Sintered Metal Friction Pad Set ~ Replaces 45105-410-305 Sintered-metal pad setSintered-metal set 29-3553 has the same listed 67 × 49.5 × 9.5 mm size and front-or-rear application for the 1977–78 CB750F.Voir la pièce 1977-78 Honda CB750F Genuine Honda Front Brake Hose Three-Way Joint ~ OEM 45123-410-000 Genuine Honda three-way jointFront brake-hose three-way joint, OEM 45123-410-000, specifically listed for the 1977–78 CB750F. Compare the fitted joint and connections before selecting it.Voir la pièce

Pièces connexes : Brake hose grommet · Disc retaining nuts, pack of ten · Brake rod pin

Hose support and hydraulic connection parts

Grommet 73-0091 replaces 45146-300-000. The supplier describes it as supporting and protecting the brake hose where it is retained. The separate genuine Honda three-way joint, 45123-410-000, is supplied without hoses, banjo bolts or sealing washers.

Select hardware for the component needing renewal

Disc retaining nut set 73-0937 supplies ten nuts replacing 90309-357-000. Brake rod pin 29-7031 replaces 46503-371-000 for the listed rear brake linkage. Match these separate hardware purchases to the parts required for the repair.

Questions before ordering

Does a front/rear pad set cover more than one caliper?

No. Kevlar 29-3547 and sintered-metal 29-3553 are each supplied as a set for one compatible caliper. Front-or-rear describes their listed brake positions, not a multiple-caliper package. Order a set for each compatible caliper being serviced.

Can I substitute the 12 mm rear pads with the same reference numbers?

Rear sets 29-3546 in Kevlar and 29-3602 in sintered metal share the 67 × 49.5 mm footprint and 45105-461-771/772 references found in the selected pad listings, but they are 12 mm thick. Their listed applications are the 1980 CB750F and 1980–81 CB900C rear brakes; 1978 CB750F fitment is not established. Selected sets 29-3547 and 29-3553 are 9.5 mm thick and explicitly list the 1977–78 F. Shared reference numbers and footprint alone do not establish a suitable substitute.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1978 Honda CB750F

Votre panier

×