VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1978 Honda CB750A — Réservoirs, bouchons, robinets et pièces

Tank fittings for this CB750A include a gasket-equipped filler cap, a separate cap seal, an outer filler lid, chrome trim, front support rubber and emblem screws. Distinguish the filler component from the surrounding finish and mounting pieces before choosing a replacement.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Réservoirs, bouchons, robinets et pièces

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB front fuel tank holder rubber 17611-283-010

Honda CB Front Fuel Tank Holder Rubber ~ Replaces 17611-283-010

$7.87 USD
02-6534
Secure the front of your fuel tank with this Front Fuel Tank Holder Rubber, a direct replacement for OEM #17611-283-010. Fits a broad range...
Honda CB750 CB550 CB450 CB400 CB350 gas cap rubber seal 17631-329-003

Honda CB Gas Cap Rubber Seal ~ Replaces 17631-329-003

$7.95 USD
20-0097
Replace the broad-fitment gas cap rubber seal on many classic Hondas with this Gas Cap Rubber Seal, replacing OEM #17631-329-003. Exceptionally wide fitment covering...
Honda CB750 CB550 CB400 filler cap 17620-399-010

Honda CB750 / CB550 / CB400 Filler Cap ~ Replaces 17620-399-010

$69.95 USD
73-0079
Replace your gas tank cap with this OEM Style Gas / Fuel Tank Cap with rubber gasket already installed, replacing OEM #17620-399-010.Note: does not...
Honda CB750 CB650 fuel tank emblem screw set

Honda CB750 / CB650 Fuel Tank Emblem Screw Set

$4.95 USD
01-0121
Complete your fuel tank emblem installation with this Fuel Tank Emblem Screw Set of 4, a direct replacement for OEM #93700-04006-0G. Enough hardware for...
Nouveau
Honda CB750A CB750K gas tank chrome trim moulding set 2 17542-405-000

1977-78 Honda CB750A / CB750K Gas Tank Chrome Trim / Moulding Set/2 ~ Replaces 17542-405-000 & 17541-405-000

$89.95 USD
99-5560
Upgrade or restore your classic Honda motorcycle with this Gas Tank Chrome Trim / Moulding Set — precision‑designed to fit stock Honda gas tanks....
Honda CB750K CB750A fuel filler lid 17531-405-000ZB

Fuel Filler Lid / Gas Tank Cover ~ Genuine Honda 17531-405-000ZB

$99.95 USD
99-5247
This genuine Honda fuel filler lid / gas tank filler cover is Honda OEM 17531-405-000ZB (Excel Black) for the listed 1977-1978 Honda CB750K and...
Comparer

1978 Honda CB750A · Tank caps, lids & fittings Buying guide

Identify the cap, outer lid or tank fitting being replaced

The cap includes a gasket but excludes a chain. The black outer lid has a separate reference and excludes its latch and mounting hardware. Trim strips, supports and emblem screws are independent purchases with their own quantities.

Parts to consider

Honda CB750 / CB550 / CB400 Filler Cap ~ Replaces 17620-399-010 Filler cap with installed gasketCap referencing 17620-399-010, supplied with rubber gasket installed. No attached chain is included.Voir la pièce Fuel Filler Lid / Gas Tank Cover ~ Genuine Honda 17531-405-000ZB Black outer filler lidGenuine Honda lid in the stated Excel Black finish, reference 17531-405-000ZB. Latch, lock, hinge hardware and seal are excluded.Voir la pièce 1977-78 Honda CB750A / CB750K Gas Tank Chrome Trim / Moulding Set/2 ~ Replaces 17542-405-000 & 17541-405-000 Two tank trim stripsOne chrome-finish strip for each side of the stock tank, referencing 17542-405-000 and 17541-405-000; not described as an exact stock replica.Voir la pièce

Pièces connexes : Separate cap rubber seal · Individual front tank support · Four tank-emblem screws

Assess the retained filler fittings before choosing a replacement

Inspect the sealing cap and outer lid as separate components. Identify which pieces are damaged or missing before comparing the cap package with the lid’s hardware exclusions.

Choose the finish after identifying the fitted tank

Check the tank style and current trim arrangement before selecting cosmetic parts. Match the lid’s color suffix and decide whether the trim set’s stated non-exact reproduction suits the restoration you intend.

Common questions

Does the filler cap include a chain?

The cap listing specifically says no chain is attached or included, while the rubber gasket is installed. Check the cap and surrounding hardware on your tank before ordering. The separate outer-lid listing should not be interpreted as supplying the excluded chain.

Does the black lid supply a new latch or lock?

No. Its buyer notes expressly exclude the latch, lock, hinge hardware, seal, tank molding and related mounting hardware. The supplied part is the stated Excel Black filler lid. Inspect the retained pieces and match the tank style before choosing that cover.

Are the front tank support rubbers sold as a pair?

The front support is sold individually under reference 17611-283-010, with two stated per motorcycle. Order the number required for the supports being replaced. The trim and four-screw emblem set have separate packages and do not supply those rubbers.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1978 Honda CB750A

Votre panier

×