Honda motorcycle parts
Choose your model and year to see parts listed for your bike.
Choose your model and year to see parts listed for your bike.
1974 Honda CB450K · Ignition Systems, Coils & Plugs Buying guide
The 12V coil has 5-ohm primary resistance, one output and approximately 80mm mounting centres. Its beige-Honda-coil note requires reversed mounting. Both cap products are sold individually without a resistance figure; point sides and condenser references must be matched separately.
Coil with attached wires and a mounting noteCoil supplies a 19-inch plug wire, 6.5-inch blue lead with dual female bullet connector and 5.25-inch black/white lead with male bullet connector. Sold individually. Match the approximately 80mm mounting centres and the beige-coil reversed-mounting requirement together.View part
VB05F cap with electrical details to confirmAftermarket cap sold individually for the named Honda applications. Compare the retained plug and ignition-lead attachment and establish the required electrical specification. The description gives no resistance value or complete terminal-dimension drawing.View part
YB05F individually sold cap optionAftermarket YB05F cap described for custom or restoration work. Match its connection to the actual plug and lead before choosing quantity. Resistance and complete connection dimensions are not specified, so confirm the details required by the retained ignition.View part
Related parts: Left point under 30204-292 replacement references · Right point under 30203-292 replacement references · Condenser references and retained-connection comparison
The coil comes with its leads already attached, and the beige-coil note changes its installation direction. Compare wire reach and bullet ends with the required paths after confirming bracket spacing. A bracket modified during earlier work still needs both mechanical and connection checks.
The left point lists 30204-292-003 / 30204-292-154, and the right lists 30203-292-003 / 30203-292-154. Condenser references are 30250-369-004 / 30280-292-672 / 30280-292-671. Confirm each purchase’s supplied quantity when planning service at more than one position.
The replacement requires reversed mounting because the wire exits differ. Compare the actual bracket, approximately 80mm centres, all stated lead lengths and connector paths in that orientation. Establish the missing attachment details where a previous bracket change affects the installation.
Confirm the new ignition’s required cap resistance and plug/lead attachment, then establish the chosen cap’s specifications. VB05F and YB05F listings give no resistance figure. Their application lists do not determine every requirement of an ignition substituted during earlier work.
Record the removed component’s side and reference and compare its attachment. Left 30204-292 and right 30203-292 products have distinct references. Confirm supplied quantity separately if other ignition components will also be renewed.
Send your model and year, plus photos of your existing part and any changes to the original setup.
Select your exact model and year to narrow your results.
Choose your model and year.