My motorcycle Choose your Honda CB model

Search parts

Searching all Honda CB parts

Example: brake pads or oil filter.

Currently viewing Starter & Charging System

Honda motorcycle parts

Choose your model and year to see parts listed for your bike.

Honda CB Starter Motor Terminal Rubber Boot ~ Replaces 32411-230-000

$4.61 USD
73-0092
Replace your starter motor terminal cover with this Starter Motor Terminal (Cover) Rubber Boot, replacing OEM #32411-230-000.Key Features• Starter motor terminal rubber boot• Replaces...

1994 Honda CB1000 · Starter Buying guide

Protect the main cable

The starter terminal carries heavy current straight from the battery. A cracked or missing boot invites corrosion and, in the worst case, a short to earth.

Fitting the boot

Disconnect the negative battery lead first. Clean the terminal and nut with a wire brush, tighten the cable and smear a little dielectric grease over the joint. Slide the new boot over the terminal so it seals fully.

Starting faults

A boot will not cure a slow crank. If the starter turns slowly, check the battery charge and the cable ends first, then the starter relay. Charging and starter parts are not currently published for this model.

Starter questions

Does the boot fit this bike?

Yes. The starter motor terminal boot lists the CB1000 for 1994-95 and the 1983 CB1000C Custom in its fitment block, and it replaces the factory boot.

Are starter motors or relays listed?

Not at the moment. The terminal boot is the only starter or charging part tagged to the 1994 CB1000, so other parts need another source.

Why bother replacing a rubber boot?

The terminal is live whenever the battery is connected. Without a boot, a dropped tool or a wet day can short it, so the small part protects the wiring.

Not sure which part you need?

Send your model and year, plus photos of your existing part and any changes to the original setup.

Ask a fitment question

Your cart

×