Honda motorcycle parts
Choose your model and year to see parts listed for your bike.
Choose your model and year to see parts listed for your bike.
1973 Honda CB750K · Clutch Plates & Springs Buying guide
The friction and steel plate listings carry different references and quantity instructions. Springs, washers, bolts and the release actuator are separate choices; none should be mistaken for a complete clutch overhaul kit.
Clutch Friction PlateFriction plate replacing 22201-371-000 and 22201-300-000. Listing specifies seven for the 1969–75 CB750K; order the quantity required.View part
Steel Clutch PlateSeparate steel plate replacing 22321-MG8-000 and 22321-283-000. Listing specifies six for the 1969–75 CB750K; order the quantity required.View part
Clutch Spring SetFour-piece spring set listed for the 1969–75 CB750K. Review the listing before choosing this spring option.View part
Related parts: Clutch spring bolt set · Clutch tab washer
The application calls for seven friction plates and six steel plates for the 1969–75 CB750K, including 1973. Later 1976–78 entries specify six friction and five steel plates. Use the entry for the clutch actually fitted, and order the two types separately.
The spring package contains four springs; the separate bolt set contains four bolts, reference 95701-06020-00. For the retaining washers, distinguish tab-washer reference 90431-292-000 from special angled-washer reference 90481-292-000. Both washer listings say 16 mm, so use the part’s form and reference too.
Seven friction plates and six steel plates are specified for the 1969–75 CB750K application. These are the quantities for the model, not a single mixed plate package. Order the types and quantities your repair needs.
The spring package lists four springs. A separate four-bolt set is available under reference 95701-06020-00. Check the bolts you will retain before adding that hardware to the spring order.
The tab washer references 90431-292-000; the special angled washer references 90481-292-000. Match the removed washer’s form and reference rather than choosing between them by the shared 16 mm size.
Send your model and year, plus photos of your existing part and any changes to the original setup.
Select your exact model and year to narrow your results.
Choose your model and year.