Finish your fender with a factory-branded touch using this Honda Fender Flap. A black flap with the Honda logo, this is the right piece for restorations where you want a period-correct branded detail on the rear fender mudflap.
Key Features
• Black fender flap with Honda logo
• Height: 6 1/2"
• Width at mount holes: 4 3/4"
• Width at bottom: 5 5/8"
• Outer slot center-to-center: 3 3/8"
Part Number: 04-0186
Livraison terrestre gratuite à partir de 50 $
Aux États-Unis et au Canada. Les commandes en stock quittent habituellement notre entrepôt le jour ouvrable même ou le suivant.
| Destination | Délai de livraison |
|---|---|
| États-Unis | 3 à 7 jours ouvrables |
| Canada | 2 à 6 jours ouvrables |
La livraison terrestre comprend un suivi, envoyé par courriel à l’expédition. Besoin de vos pièces plus rapidement? Des options express sont proposées au paiement.
Retours sous 60 jours pour les pièces admissibles
Aucuns frais de remise en stock. Les pièces admissibles doivent être inutilisées, non installées, non modifiées et complètes. Le délai de 60 jours commence à la livraison de votre commande.
Les pièces électriques sont exclues des retours standards. Vérifier l’admissibilité au retour.
Commencez votre demande de retour ci-dessous. Attendez nos instructions avant d’expédier une pièce.
Demander un retourAutres options de livraison
Service économique de Postes Canada : Proposé au paiement pour certains petits articles. Prévoyez de 1 à 3 semaines pour la livraison. Aucun suivi ni assurance ne sont inclus.
Hors des États-Unis et du Canada : Les délais varient selon la destination et le mode de livraison. Les acheteurs sont responsables des droits de douane, taxes et frais d’importation applicables. Nous ne pouvons pas déclarer les commandes comme des cadeaux.
Questions fréquentes
What are the dimensions of the black Honda-logo fender flap?
It measures 6-1/2 inches tall, 4-3/4 inches wide at the mounting-hole area, and 5-5/8 inches wide at the bottom. The two outer mounting slots are 3-3/8 inches apart center-to-center.
What distinguishes this fender flap from the plain black version?
SKU 04-0186 carries the Honda logo. For a logo-free custom installation with the same stated dimensions, use plain flap SKU 04-0191.
What should be checked before mounting the Honda fender flap?
Confirm the slot spacing against the rear fender, then check that the 6-1/2-inch flap has adequate tire and ground clearance throughout suspension travel.