VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1971 Honda SL350K1 Motosport — pièces de moto

A fuel-system order for a 1971 Honda SL350K1 should follow the location needing attention: tank connection, filler cap or carburetor. Identify the tank and carburetors actually fitted before choosing components that may appear familiar from another Honda.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Alimentation en carburant

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB550 CB500 CB450 type filler chrome cap 17510-323-310

Honda CB OEM Type Filler Chrome Cap ~ Replaces 17510-323-310

$49.95 USD
20-0045
Replace your OEM-type filler cap with this OEM Type Gas/Fuel Tank Chrome Cap, including gasket and hinge pin with E-clip for easy installation. Replaces...
Honda CB750 CB550 CB500 CB450 CB400 gas fuel tank cap latch assembly

Honda CB Gas/Fuel Tank Cap Latch Assembly

$44.95 USD
20-0083
Replace your gas cap latch with this Gas/Fuel Tank Cap Latch Assembly. Includes a chrome latch, return spring, latch mounting pin, and C-clip.Key Features•...
Honda CB750 CB500 CB450 CB125 CB100 float valve 16011-302-004

Honda CB Float Valve ~ Replaces 16011-302-004

$9.95 USD
48-5009
Replace your float needle and seat with this Float Valve Set (needle and seat), replacing OEM #16011-302-004 / #16011-375-004.Key Features• Float valve set (needle...
Honda CB750 CB450 CB350 CL350K3 gas cap rubber seal 17525-300-000

Honda CB Gas Cap Rubber Seal ~ Replaces 17525-300-000

$5.95 USD
20-0038
Replace your early Honda gas cap rubber seal with this Gas Cap Rubber Seal, replacing OEM #17525-300-000. Fits the earliest CB750K, CB450K/CL450K, and CB350K/CL350K/SL350K.Key...
Nouveau
Honda CB550 CB500 CB360 rear fuel tank holder rubber 17613-286-000

Honda CB Rear Fuel Tank Holder Rubber ~ Replaces 17613-286-000

$9.95 USD
12-0133
Restore proper rear fuel tank mounting on your mid-'70s twin or four with this Rear Fuel Tank Holder Rubber, a direct replacement for OEM...
Honda CB450 CB360 CB350 CL350K0 CL350K2 fuel petcock 16950-292-000

Honda CB Fuel Petcock ~ Replaces 16950-292-000

$34.95 USD
29-0542
Replace your CB450, CL450, CB350, or CB360 fuel petcock with this Fuel Petcock, replacing OEM #16950-292-000 with M16 x 1.5 threads. Please verify the...
Honda CB750 CB450 CB350 CB200 CB175 front cable clip 45465-270-000

Honda CB Front Cable Clip ~ Replaces 45465-270-000

$7.00 USD
73-1116
Keep your wiring clean and secure with this Front Cable Clip, designed to hold the stop switch wires neatly against the front cable. Replaces...
Honda CB550 CB500 CB400 CB350 float bowl gasket

Honda CB550/CB500/CB400/CB350 Float Bowl Gasket

$9.95 USD
20-8032
Replace your CB350F/CB400F or CL350/SL350 float bowl gasket with this Float Bowl Gasket (O-ring).Key Features• Float bowl gasket (O-ring)Fitment / Compatibility• Honda CB350F (1973‑74)...
Nouveau
Honda CB350 CL350K0 CL350K1 CL350K2 CL350K3 carburetor screw kit

Honda CB Carburetor Screw Kit

$17.57 USD
48-0795
Refresh your CB350 or CL350 / SL350 carb screws with this Carburetor Screw Kit. Enough for 2 carbs. Get a new set of screws...
Comparer

1971 Honda SL350K1 · Fuel System Buying guide

Follow the repair from the tank to the carburetor

Tank hardware and carburetor internals have different matching requirements. A petcock thread, a filler-cap hinge and a needle-and-seat set each need their own comparison with the fitted equipment before the order is complete.

Parts to consider

Honda CB Fuel Petcock ~ Replaces 16950-292-000 Threaded fuel petcockPetcock with M16 × 1.5 threads and replacement reference 16950-292-000.Voir la pièce Honda CB OEM Type Filler Chrome Cap ~ Replaces 17510-323-310 Chrome filler capOEM-type replacement cap supplied with a gasket, hinge pin and E-clip.Voir la pièce Honda CB Rear Fuel Tank Holder Rubber ~ Replaces 17613-286-000 Rear tank-holder rubberRear fuel-tank cushion rubber carrying replacement reference 17613-286-000.Voir la pièce

Pièces connexes : Float needle and seat set

Match the tank fittings physically

The petcock has an M16 × 1.5 thread. Compare that connection and the available clearance with the actual tank before ordering. For filler-cap work, inspect the hinge and latch separately so that a new cap is not expected to correct unrelated worn mounting hardware.

Identify the carburetor before buying internals

The linked float-valve set includes its needle and seat. Choose it against the carburetor fitted, then decide whether bowl sealing or screw replacement is also needed. Those separate repairs should be based on inspection rather than an assumption that one small kit supplies everything.

Buying questions

Will the petcock fit an aftermarket or changed fuel tank?

Measure the tank connection and compare it with the petcock’s M16 × 1.5 thread. Also check outlet clearance; the motorcycle’s model label does not identify fittings on a replacement tank.

Does the chrome cap supply both hinge and latch hardware?

It includes a gasket, hinge pin and E-clip. The latch is a separate assembly, so inspect that mechanism before deciding whether a cap-only order covers the repair.

Should I order a float valve for a carburetor overflow complaint immediately?

Identify the fitted carburetor and inspect the cause first. The offered set contains a needle and seat, but the repair may also depend on the float, its adjustment or contamination.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1971 Honda SL350K1

Votre panier

×