VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1973 Honda CL350K5 Scrambler — pièces de moto

The 335 mm rear shock sets listed for the 1973 Honda CL350K5 offer black or chrome finishes with four-position preload. Confirm the mountings on your motorcycle and compare the supplied fitting pieces before selecting the appearance you want.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Amortisseurs

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB1100 CB900 CB750 type shock absorber nut 90309-315-000

Honda CB OEM Type Shock Absorber Nut ~ Replaces 90309-315-000

$3.95 USD
49-0779
Replace your shock absorber nuts with this Shock Absorber Nut, a replica of the OEM type used when installing shocks. Replaces OEM #90309-315-000.Note: 2...
Honda CB1100 CB1000 shock absorber joint rubber set 2 52484-292-000

Honda CB Shock Absorber Joint Rubber Set/2 ~ Replaces 52484-292-000

$6.76 USD
73-0093
Replace your shock joint rubbers with this Shock Absorber Joint Rubber Set of 2, replacing OEM #52484-292-000.Key Features• Shock absorber joint rubbers• Set of...
Universal chrome shrouded 290mm shock absorber set side detail

Universal Motorcycle Shorty Shock Absorber Set ~ Chrome Shrouded 290mm

$119.95 USD
06-3591
Drop the back end with a clean all-chrome look using this Custom Shorty Shock Absorber Set. Chrome body and shroud with chrome progressive-wound springs,...
Honda CB black 335mm shock absorber set side detail

Honda CB Stock Length Shock Absorber Set ~ Black 335mm

$139.95 USD
06-3598
Stick with stock geometry but blacked out with this All-Black Stock-Length Shock Absorber Set. Black body, black progressive-wound heavy-duty springs, and a black end...
Honda CB chrome 335mm shock absorber set side detail

Honda CB Stock Length Shock Absorber Set ~ Chrome 335mm

$139.95 USD
06-3623
Go with a clean all-chrome stock-length setup without the end-cap detail using this Stock-Length Shock Absorber Set. Chrome body with chrome progressive-wound heavy-duty springs,...
Nouveau
Honda CB chrome 335mm shock absorber set side detail

Honda CB Stock Length Shock Absorber Set ~ Chrome 335mm

$139.95 USD
06-3588
Step up to a clean chromed-out rear end with this All-Chrome Stock-Length Shock Absorber Set. Features a chrome body, chrome progressive-wound heavy-duty springs, and...
Universal black shrouded 290mm shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black Shrouded 290mm

$129.95 USD
06-3590
Get the shortened look with a bit more coverage using this Custom Shorty Shock Absorber Set featuring a black body and shroud with black...
Épuisé
Universal black 290mm eye-to-eye shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black Eye-to-Eye 290mm

$139.95 USD
06-3592
Go shorter with a different mounting configuration using this Custom Shorty Shock Absorber Set. Black body and shroud with black progressive-wound springs, 290mm (11...
Épuisé
Universal black 290mm shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black 290mm

$139.95 USD
06-3589
Slam the back end with this Custom Shorty Shock Absorber Set, measuring 290mm (11 3/8") eye-to-clevis, noticeably shorter than stock for custom café, bobber,...
Comparer

1973 Honda CL350K5 · Rear Shock Absorbers Buying guide

Compare shock dimensions first, then choose the finish

Both featured shock sets explicitly cover CL350K 1969–73 and measure 335 mm eye-to-clevis. Bushings, inserts, washers and a preload wrench are included; the separate joint-rubber pack contains two pieces.

Parts to consider

Honda CB Stock Length Shock Absorber Set ~ Black 335mm Black 335mm shock setBlack body, springs and end cap; four-position preload and supplied fitting pieces.Voir la pièce Honda CB Stock Length Shock Absorber Set ~ Chrome 335mm Chrome 335mm shock setChrome body and springs, measured eye-to-clevis; includes a preload wrench.Voir la pièce Honda CB Shock Absorber Joint Rubber Set/2 ~ Replaces 52484-292-000 Two shock joint rubbersRubber set of two for replacement reference 52484-292-000.Voir la pièce

Pièces connexes : Chrome 335mm set with chrome end cap

Compare the complete product specification

Both featured shock sets measure 335mm eye-to-clevis and provide four-position spring preload. Their packages include bushings, inserts, washers and a wrench. Check those fitting pieces against the existing mount rather than assuming the general stock-length description settles every installation detail.

Keep unassessed custom changes out of a standard repair

The 290 mm products are universal custom choices, with both eye-to-clevis and eye-to-eye designs in the grid. Their presence here does not establish a K5 conversion. For a planned shorter suspension, obtain an assessment of the motorcycle and proposed set before ordering.

Common buying questions

What differs between the two featured 335mm sets?

The black set has a black body, springs and end cap; the other featured set uses a chrome body and springs. Both specify four-position preload and include bushings, inserts, washers and a preload wrench.

Do the joint rubbers come with a whole-bike quantity?

The separate joint-rubber product contains two pieces. Match them to the locations being serviced and the shock package already selected; that pack count does not independently establish the number needed for every K5 repair.

Are the shorter universal sets verified substitutes?

Their suitability for a K5 conversion has not been established. Length and end mounts differ, so use a qualified suspension assessment for that change rather than treating a shorter universal set as another finish of the 335 mm product.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1973 Honda CL350K5

Votre panier

×