VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1969 Honda CL350K1 Scrambler — pièces de moto

A targeted 1969 Honda CL350K1 carburetor repair can call for diaphragm rubber, a chrome top cover or a bowl drain screw. Each is sold individually. Compare the affected assembly first, with special attention to the diaphragm’s size and locating tab.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Flotteurs et composants de carburateur

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB550 CB500 CB450 CB400 float bowl drain screw

Honda CB Stock Type Float Bowl Drain Screw

$7.50 USD
48-5041
Replace your stock-type float bowl drain screw with this Float Bowl Drain Screw with O-Ring.Note: sold each, order the quantity you require.Key Features• Stock-type...
Honda CB350K CB350G CL350K SL350 chrome carburetor top cover 16014-286-000

Honda CB350K / CB350G / CL350K / SL350 Chrome Carburetor Top Cover

$24.95 USD
13-0011
Aftermarket chrome carburetor top cover for the Honda 350 models listed below. It replaces a worn, damaged or missing original carburetor top cover.Product Details...
Épuisé
Honda CB350 CL350K0 CL350K1 carb diaphragm rubber 16022-287-004

Honda CB Carb Diaphragm Rubber ~ Replaces 16022-287-004

$23.45 USD
48-1985
Replace your carburetor top diaphragm rubber with this Carburetor Top Diaphragm Rubber. Outer dimension 72mm, inner dimension 25mm. Replaces the diaphragm rubber on Honda...
Comparer

1969 Honda CL350K1 · Carburetor Components Buying guide

Separate diaphragm, top-cover and bowl-drain repairs

The diaphragm rubber is a 72 mm OD × 25 mm ID replacement with a locating tab. The chrome cover and O-ring-equipped drain screw serve different locations; select components from the repair findings rather than treating them as one kit.

Parts to consider

Honda CB Carb Diaphragm Rubber ~ Replaces 16022-287-004 Replacement diaphragm rubberIndividual carburetor diaphragm rubber, 72 mm OD × 25 mm ID. Compare its profile and locating tab as well as the dimensions.Voir la pièce Honda CB350K / CB350G / CL350K / SL350 Chrome Carburetor Top Cover Chrome carburetor top coverAftermarket chrome top cover replacing Honda 16014-286-000, sold individually. Match the cover pattern to the fitted carburetor.Voir la pièce Honda CB Stock Type Float Bowl Drain Screw Bowl drain screw with O-ringOne stock-type float-bowl drain screw supplied with its O-ring. Compare the screw and sealing arrangement with the bowl being serviced.Voir la pièce

Check the diaphragm rubber and its locating tab

The replacement rubber corresponds to Honda diaphragm references 16022-287-004, 16022-287-014 and 16022-287-024. Compare its 72 mm outer and 25 mm inner dimensions, profile and attachment to the fitted slide. The rubber tab establishes slide orientation; keep the applicable carburetor service instructions with the repair.

Order the cover and drain parts by location

The chrome top cover replaces Honda 16014-286-000 and is supplied individually. The bowl drain screw is also sold individually, with an O-ring included. Check which location needs attention before ordering so a cosmetic cover replacement and a bowl-drain repair do not become an unnecessary blanket parts purchase.

Buying questions

Is this a complete diaphragm-and-slide assembly?

The product is replacement diaphragm rubber, sold individually. It is described by its 72 mm OD and 25 mm ID and corresponding Honda diaphragm references. Check the existing slide and its attachment before choosing the rubber-only repair.

Is matching the diaphragm diameter enough?

Also compare its profile, locating tab and attachment to the slide. The tab matters to slide orientation. With replacement carburetors, identify the actual assembly before using the motorcycle’s model application to select the rubber.

Must I add an O-ring to the bowl drain screw order?

An O-ring is already included with each drain screw. Match the screw and sealing arrangement to the fitted bowl and count the locations being repaired. The chrome top cover is a separate, individually supplied product.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1969 Honda CL350K1

Votre panier

×