VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1968 Honda CL350K0 Scrambler — pièces de moto

Compare the tank fittings currently on your 1968 Honda CL350K0 before ordering a petcock, chrome cap or rear mounting rubber. Each has a different interface to check, and a replacement tank can change the thread, cap attachment or rear support independently.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Réservoirs, bouchons, robinets et pièces

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB550 CB450 CB400 CB350 gas cap rubber seal 17631-329-003

Honda CB Gas Cap Rubber Seal ~ Replaces 17631-329-003

$7.95 USD
20-0097
Replace the broad-fitment gas cap rubber seal on many classic Hondas with this Gas Cap Rubber Seal, replacing OEM #17631-329-003. Exceptionally wide fitment covering...
Nouveau
Honda CB550 CB500 CB360 rear fuel tank holder rubber 17613-286-000

Honda CB Rear Fuel Tank Holder Rubber ~ Replaces 17613-286-000

$9.95 USD
12-0133
Restore proper rear fuel tank mounting on your mid-'70s twin or four with this Rear Fuel Tank Holder Rubber, a direct replacement for OEM...
Honda CB450 CB360 CB350 CL350K0 CL350K2 fuel petcock 16950-292-000

Honda CB Fuel Petcock ~ Replaces 16950-292-000

$34.95 USD
29-0542
Replace your CB450, CL450, CB350, or CB360 fuel petcock with this Fuel Petcock, replacing OEM #16950-292-000 with M16 x 1.5 threads. Please verify the...
Nouveau
Honda CB450 CL450 CB350 CB72 gas tank filler cap 17620-402-000

Honda Gas Tank Filler Cap ~ Replaces 17620-402-000

$7.95 USD
07-4647
Restore an early-era Honda with this Chrome Gas Tank Filler Cap (with gasket installed), replacing OEM #17620-402-000 / #17620-402-010. Fits the oldest models in...
Comparer

1968 Honda CL350K0 · Tank Caps & Fuel Taps Buying guide

Let the fitted tank determine its replacement parts

The petcock has a specified thread, the chrome cap includes a gasket, and the mounting rubber serves the rear tank support. Compare each fitting with the tank on the motorcycle rather than assuming one match settles them all.

Parts to consider

Honda CB Fuel Petcock ~ Replaces 16950-292-000 M16 × 1.5 fuel petcockReplacement fuel tap with an M16 × 1.5 tank connection. Verify the thread on the tank currently fitted.Voir la pièce Honda Gas Tank Filler Cap ~ Replaces 17620-402-000 Chrome fuel tank capChrome filler cap supplied with a gasket installed. Compare the cap attachment and sealing surface on your tank.Voir la pièce Honda CB Rear Fuel Tank Holder Rubber ~ Replaces 17613-286-000 Rear fuel tank mounting rubberRear tank holder rubber. Match the rear mounting arrangement, especially if the fuel tank has been changed.Voir la pièce

Pièces connexes : Replacement fuel cap seal

Choose between a cap and a sealing repair

The chrome filler cap comes with a gasket installed. If you intend to retain the existing cap, compare the separately linked rubber seal with its sealing arrangement. Check the cap attachment and tank sealing surface before deciding whether a cap or seal-only order addresses the repair.

Check the replacement tank at every interface

After a tank change, verify the M16 × 1.5 tap connection and compare the outlet and lever clearance. Check the rear support separately against the tank-holder rubber. Matching the tap thread does not establish that the cap and mounting pieces suit the same tank.

Buying questions

Does the chrome tank cap need a separate gasket?

The chrome cap is supplied with a gasket installed. Compare the cap attachment and tank sealing surface before ordering, and avoid duplicating the separate seal unless your repair plan requires it.

What should I check before ordering the petcock?

Verify the tank connection is M16 × 1.5 and compare the outlet arrangement and operating clearance. A changed tank needs its own compatibility check even if the motorcycle’s model is unchanged.

Can I replace just the cap sealing rubber?

A separate replacement cap seal is linked. Compare it with the retained cap’s seal profile and inspect the cap attachment and sealing surface before choosing a seal-only repair.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1968 Honda CL350K0

Votre panier

×