VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1968 Honda CL350K0 Scrambler — pièces de moto

The useful choices in this 1968 Honda CL350K0 route include footrest rubbers, passenger footrest rubbers and side-stand pivot hardware. Identify which location needs attention before comparing parts, particularly if the footrests or stand have been replaced during earlier work.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Repose-pieds, sélecteurs, kicks et béquilles

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB1000 CB900 CB750 CB650 side stand spring 95014-72402

Honda CB1000/CB900/CB750/CB650 Side Stand Spring

$3.95 USD
49-0788
Replace your side stand spring with this Side Stand Spring, replacing OEM #95014-72402.Key Features• Side stand spring• Replaces OEM #95014-72402• Honda part name: Spring...
Épuisé
Honda CB gear shift lever rubber 95011-40000

Honda CB Gear Shift Lever Rubber ~ Replaces 95011-40000

$2.95 USD
02-2478
Replace a cracked, hardened, or missing gear shift rubber with this Gear Shift Rubber, a direct replacement for OEM #95011-40000. Fits an exceptionally broad...
Honda CB750 CB650 CB550 side stand pivot bolt and nut set 90108-283-000

Honda CB Side Stand Pivot Bolt & Nut Set ~ Replaces 90108-283-000

$4.61 USD
73-0893
Replace your side stand pivot hardware with this Side Stand Pivot Bolt & Nut Set, used to fasten the side stand in place. Replaces...
Honda CB750 CB550 CB500 CB450 CB350 passenger rear footrest rubber set 95011-31000

Honda CB Passenger Rear Footrest Rubber Set

$14.95 USD
73-0185
Replace your passenger rear footrest rubbers with this Passenger Rear Footrest Rubber Set of 2, replacing OEM #95011-31000.Key Features• Passenger rear footrest rubbers• Set...
Honda CB750 CB450 CB350 CB175 CB125 footrest rubbers 50661-110-000

Honda CB Footrest Rubbers ~ Replaces 50661-110-000

$22.95 USD
73-0183
Replace your footrest rubbers with this Footrest Rubbers Set of 2, replacing OEM #50661-110-000.Key Features• Footrest rubbers• Set of 2• Replaces OEM #50661-110-000• Honda...
Comparer

1968 Honda CL350K0 · Footrests & Side Stand Buying guide

Separate footrest coverings from stand hardware

The footrest and passenger-footrest products each contain two rubbers. The side-stand set supplies its pivot bolt and nut. Inspect the footrest cores and stand pivot separately when deciding which pieces need renewal.

Parts to consider

Honda CB Footrest Rubbers ~ Replaces 50661-110-000 Footrest rubber setFootrest rubbers supplied as a set of two. Compare their mounting shape with the footrests being refurbished.Voir la pièce Honda CB Passenger Rear Footrest Rubber Set Passenger footrest rubber setPassenger rear-footrest rubbers supplied as a set of two. Check the passenger footrests on the bike before choosing the set.Voir la pièce Honda CB Side Stand Pivot Bolt & Nut Set ~ Replaces 90108-283-000 Side-stand pivot bolt and nutSet containing the side-stand pivot bolt and nut. Compare the existing stand, pivot and mounting requirements before selection.Voir la pièce

Pièces connexes : Gear-lever rubber

Choose rubbers around the fitted footrests

Both featured rubber products are supplied as sets of two, but their described positions differ. Compare the worn rubber’s shape and attachment with the correct candidate. A footrest changed during a restoration needs checking independently of the motorcycle’s model-year label.

Keep the pivot repair specific

The side-stand hardware set contains a pivot bolt and nut. Confirm their suitability for the stand and mounting point before selection, and inspect the surrounding assembly using appropriate service information. The linked gear-lever rubber belongs to a separate control-covering repair.

Buying questions

Are passenger rubbers the same choice as the other footrest rubbers?

They are separate products, each supplied as a set of two. The passenger product is specifically described for rear footrests; compare the fitted parts before deciding which set you need.

What comes with the side-stand pivot hardware?

The set supplies the side-stand pivot bolt and nut. Inspect the stand and frame pivot as well as the fasteners, because worn mounting holes need their own assessment before reassembly.

Will the linked gear-lever rubber suit a changed shift lever?

Compare the rubber’s fit with the replacement lever. A changed control can have different dimensions, so the motorcycle’s model label alone cannot confirm the rubber selection.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1968 Honda CL350K0

Votre panier

×