Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

Consultation en cours Démarrage et système de charge

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB Starter Motor Terminal Rubber Boot ~ Replaces 32411-230-000

$4.61 USD
73-0092
Replace your starter motor terminal cover with this Starter Motor Terminal (Cover) Rubber Boot, replacing OEM #32411-230-000.Key Features• Starter motor terminal rubber boot• Replaces...
Épuisé
Honda CB750 CB550 CB500 CB400 CB350 rectifier regulator

Honda CB Rectifier/Regulator

$199.95 USD
24-2109
Replace your SOHC CB regulator and rectifier with this Rick's Electric OEM-Style Rectifier/Regulator. Combination unit replaces the OEM regulator and rectifier; stock-type plugs and...

Honda CB Starter Solenoid Relay ~ Replaces 35850-375-000

$38.95 USD
24-2003
Replace your late-'70s CB starter solenoid with this Starter Solenoid Relay, replacing OEM #35850-375-000 / #35850-286-027. Broad fitment across the late SOHC CB750, CB500T/CB550...
Épuisé
Honda CB750 CB550 rectifier regulator lithium ion battery compatible

Honda CB Rectifier/Regulator ~ Lithium Ion Battery Compatible

$199.95 USD
24-2011
Upgrade to a lithium-ion compatible charging regulator with this Rick's Electric Rectifier/Regulator. Designed with a lower voltage set point to work exclusively with lithium-ion...
Nouveau
Honda CB starter motor seal 24.4 x 3.1 91312-MG7-003

Honda CB Starter Motor Seal 24.4 x 3.1 ~ Replaces 91312-MG7-003

$4.50 USD
03-0780
Seal up your starter motor with this Starter Motor Seal, size 24.4 x 3.1, replacing OEM #91312-MG7-003 / #91309-300-000 / #91309-425-003. Exceptionally wide fitment...

1973 Honda CB350F0 · Starting & Charging Buying guide

Choose charging parts around the battery

Two combined rectifier/regulators have different battery requirements. Starter service also includes a terminal boot and seal, useful when the issue is a damaged cover or sealing component rather than the charging circuit.

Allow for the regulator mount

The standard combined unit measures 68 × 94 × 26mm; the lithium-only unit measures 70 × 94 × 27mm. Both have 80mm mounting-hole centers and stock-type plugs. Assess mounting clearance and use the supplied instructions without bypassing the motorcycle’s safety circuits.

Keep starter service targeted

A terminal boot replaces a damaged insulating cover, while the linked starter-motor seal addresses the sealing joint. Neither proves that a no-start problem is inside the motor. Check the actual failed component and compare connections before choosing a relay or a larger assembly.

Starting & Charging questions

Can the lithium regulator charge a lead-acid battery?

No. The lithium-only unit expressly excludes standard lead-acid batteries. Its specified set point is 14V ±0.2; confirm that this also suits the particular lithium battery before purchasing or installing it.

Will the combined regulator bolt straight on?

Custom mounting may be required. Compare the unit’s dimensions and 80mm mounting-hole centers with the available space, then follow its installation instructions. Stock-type plugs do not by themselves guarantee a direct mechanical mounting fit.

Should I order a terminal boot or replace the starter wiring?

Inspect the cover and electrical connection separately. A split rubber boot can be replaced when the terminal and wiring remain sound; damaged connections need their own repair. The separately linked starter seal serves the motor’s sealing joint.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité

Votre panier

×