VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1974 Honda CL450K6 Scrambler — pièces de moto

Prepare a swingarm order for a 1974 Honda CL450K6 by identifying the pieces at the pivot ends and inside the assembly. Dust caps, felts, thrust bushings, grease fittings and retaining hardware are separate products, with different package contents to reconcile.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Pièces de bras oscillant

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB650 CB550 swingarm dust seal cap (set 2) 52144-362-000

Honda CB Swingarm Dust Seal Cap (Set/2) ~ Replaces 52144-362-000

$16.95 USD
73-1028
Replace your swingarm dust seal caps with this Swingarm Dust Seal Cap Set of 2. These caps go on the ends of the swingarm...
Honda CB750 CB550 CB500 CB450 CB350 swing arm felt set 2 52145-283-000

Honda CB Swing Arm Felt Set/2 ~ Replaces 52145-283-000

$6.76 USD
73-1129
Protect your swingarm and enhance rear suspension longevity with this OEM-style Swing Arm Felt Set. These felts are designed to sit inside the pivot...
Nouveau
Honda CB750 CB550 CB500 rear shock swingarm bushing 40548-268-000

Honda CB Rear Shock Swingarm Bushing ~ Replaces 40548-268-000

$6.20 USD
28-6918
Rear shock swingarm bushing designed to replace the original Honda component, matching OEM reference 40548-268-000. Fits between the shock and swingarm to provide proper...
Honda CB750 CB550 swingarm pivot bolt locknut w washer 90354-268-000

Honda CB Swingarm Pivot Bolt Locknut with Washer ~ Replaces 90354-268-000

$7.00 USD
29-7022
Replace your swingarm pivot bolt locknut and washer with this Swingarm Pivot Bolt Locknut with Locknut Washer. Replaces OEM #90354-268-000 (locknut) and #90526-268-000 (washer).Key...
Solde
Honda CB750 CB550 CB500 bronze thrust bushing set 2 52109-283-300

Honda CB Bronze Thrust Bushing Set/2 ~ Replaces 52109-283-300

$31.72 $24.95 USD
You save $6.77
73-0883
Upgrade your swingarm bushings with this Bronze Thrust Bushing Set of 2. Replace the cheaply made, worn-out factory swingarm bushings with a 2-piece set...
Honda CB750 CB550 CB500 CB450 swingarm grease fitting nipple (pk 2) 96201-30001

Honda CB Swingarm Grease Fitting Nipple (Pk/2)

$7.95 USD
73-0941
Replace your swingarm grease fittings with this Grease Fitting Nipple A .45 Pk/2. These fittings are used with the swingarm. Replaces OEM #96201-30001.Key Features•...
Comparer

1974 Honda CL450K6 · Swingarm Pivot Parts Buying guide

Identify the pivot-end caps before building the repair list

The two-cap set uses reference 52144-362-000. Felt and bronze bushing sets each supply two pieces under different references, while the locknut-and-washer product addresses the fastening end of the repair.

Parts to consider

Honda CB Swingarm Grease Fitting Nipple (Pk/2) Swingarm grease fitting packTwo grease fittings supplied per pack, with reference 96201-30001. Match the receiving fitting before ordering for the retained swingarm.Voir la pièce

Pièces connexes : Two pivot-end dust caps · Two swingarm pivot felts · Two bronze pivot bushings

Record cap, felt and bushing references individually

The linked dust caps replace 52144-362-000 and explicitly name the 1974 CL450. Linked felts use 52145-283-000 and bronze bushings use 52109-283-300. Each package supplies two pieces; identify the worn locations before deciding which of the three packages the job needs.

Plan the fastening and lubrication items separately

The locknut-and-washer product carries references 90354-268-000 and 90526-268-000. Grease fittings come two to a pack under 96201-30001. Inspect the receiving fittings and retained pivot hardware before choosing replacements, and use model-appropriate service information for assembly checks and adjustment.

Ordering questions

How do I avoid ordering a cap intended for a different swingarm?

Match the fitted pivot-end arrangement and reference 52144-362-000. This product supplies two dust seal caps, but the model’s collection membership does not identify a substituted swingarm or establish interchange with a different cap reference.

Do the two dust caps include the felts and bronze bushings?

The caps, felts and bronze bushings are three separate two-piece packages. Check each pivot component before ordering. Their equal package counts do not make the dust-cap set a complete pivot-service kit.

Does the pivot locknut and washer product include a replacement pivot bolt?

The stated contents are the locknut and its washer, referenced 90354-268-000 and 90526-268-000. Inspect the retained bolt separately; the product description does not identify it as part of that package.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1974 Honda CL450K6

Votre panier

×