Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

Consultation en cours Tubes, ressorts, joints et soufflets de fourche

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB Stock Type Fork Gaitors ~ Replaces 51611-300-000

$29.95 USD
27-1061
Replace your fork gaitors with this Black Stock Type Fork Gaitors Set of 2, replacing OEM #51611-300-000.Key Features• Stock-type black fork gaitors, set of...

Honda CB Stock Type Reflector ~ Replaces 33741-340-670

$21.46 USD
11-2303
Restore your mid-'70s Honda's stock reflectors with this Stock-Type Screw-On Reflector with a 6mm thread, replacing OEM #33741-340-670. Broad fitment covering the 1972-78 CB750...

Honda CB Fork Cover Rubber Set ~ Replaces 51601-300-000

$29.95 USD
73-0836
Replace your fork cover rubbers with this Fork Cover Rubber Set of 2, replacing OEM #51601-300-000.Key Features• Fork cover rubbers• Set of 2• Replaces...

Honda CB Fork Internal Circlip Set

$7.95 USD
73-1035
Replace your fork internal circlips with this Fork Internal Circlip (48mm) Set of 2, replacing OEM #94521-48000.Key Features• Fork internal circlips• 48mm• Set of...

Honda CB Stock Type Front Reflector Rubber Base ~ Replaces 33743-341-670

$8.95 USD
11-2304
Fit the rubber base beneath your stock front reflector with this Stock-Type Front Reflector Rubber Base, replacing OEM #33743-341-670.Key Features• Stock-type front reflector rubber...

Honda CB Fork Spacer Trim Set ~ Replaces 51608-300-000

$37.95 USD
27-1112
Restore your chrome fork boot tops with this Chrome Front Fork Spacer Trim Set of 2. These are the chrome ribs that cover the...

Honda CB Fork Gaitors ~ Replaces 51611-300-000

$29.95 USD
27-1089
Replace your fork gaitors with this Black Fork Gaitors Set of 2, replacing OEM #51611-300-000.Note: these are about 1.75" shorter than the stock type...

1971-74 Honda CB500K / CB450K / CL450K5 Front Fork Tube Cap Bolt with O-Ring ~ Replaces Honda OEM 90123-323-010

$23.85 USD
29-6019
Replace a damaged, rusted, or rounded front fork tube cap bolt on the Honda CB500K, CB450K, and supported CL450K applications listed below. This aftermarket...

1972 Honda CL450K5 · Fork Covers & Reflector Parts Buying guide

Compare boot coverage before adding caps and trim

The reflector has a 6 mm thread and its base is separate. Two linked gaitor versions share a reference but differ in coverage; the linked aftermarket top bolt includes an O-ring and specifically names this K5.

Choose between the two gaitor descriptions

The two linked black gaitor sets each supply two pieces under reference 51611-300-000. The alternative is about 1.75 inches shorter than the stock-type set. Both explicitly include the 1972 CL450; compare the retained seating points and coverage before choosing between them.

Count top bolts and their included seals together

The linked aftermarket top bolt expressly names CL450K5 (1972), replaces 90123-323-010 and includes an O-ring. It is sold individually, so count the caps being replaced. The featured reflector and rubber base are separate purchases for their own mount, not parts of the cap package.

Ordering questions

Why do the two gaitor sets need a separate comparison if their reference matches?

Both use reference 51611-300-000, but the alternative is described as about 1.75 inches shorter. Compare coverage and the actual seating points before ordering, particularly when the fork covers or complete front end have changed.

Should I add another O-ring when ordering the replacement top bolt?

The offered top bolt includes an O-ring. Compare the required cap reference and confirm the repair scope before adding separate seals; an extra O-ring set should correspond to an identified need rather than an assumed omission.

Are cover rubbers and the chrome boot-top trim supplied together?

They are separate two-piece products: the rubber set carries 51601-300-000 and the trim set carries 51608-300-000. Inspect both locations and decide which pieces need replacement before calculating the quantities for the fork refresh.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité

Votre panier

×