VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1974 Honda CB450K — Pièces de bras oscillant

Use the pivot and rear shock attachments actually fitted to select swingarm parts for your 1974 CB450K. The dust cap set references 52144-362-000 for this application. Bushings, felts and locknut hardware are separate purchases, so identify their positions and supplied quantities before completing the order.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Pièces de bras oscillant

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB650 CB550 swingarm dust seal cap (set 2) 52144-362-000

Honda CB Swingarm Dust Seal Cap (Set/2) ~ Replaces 52144-362-000

$16.95 USD
73-1028
Replace your swingarm dust seal caps with this Swingarm Dust Seal Cap Set of 2. These caps go on the ends of the swingarm...
Honda CB750 CB550 CB500 CB450 CB350 swing arm felt set 2 52145-283-000

Honda CB Swing Arm Felt Set/2 ~ Replaces 52145-283-000

$6.76 USD
73-1129
Protect your swingarm and enhance rear suspension longevity with this OEM-style Swing Arm Felt Set. These felts are designed to sit inside the pivot...
Nouveau
Honda CB750 CB550 CB500 rear shock swingarm bushing 40548-268-000

Honda CB Rear Shock Swingarm Bushing ~ Replaces 40548-268-000

$6.20 USD
28-6918
Rear shock swingarm bushing designed to replace the original Honda component, matching OEM reference 40548-268-000. Fits between the shock and swingarm to provide proper...
Honda CB750 CB550 swingarm pivot bolt locknut w washer 90354-268-000

Honda CB Swingarm Pivot Bolt Locknut with Washer ~ Replaces 90354-268-000

$7.00 USD
29-7022
Replace your swingarm pivot bolt locknut and washer with this Swingarm Pivot Bolt Locknut with Locknut Washer. Replaces OEM #90354-268-000 (locknut) and #90526-268-000 (washer).Key...
Solde
Honda CB750 CB550 CB500 bronze thrust bushing set 2 52109-283-300

Honda CB Bronze Thrust Bushing Set/2 ~ Replaces 52109-283-300

$31.72 $24.95 USD
You save $6.77
73-0883
Upgrade your swingarm bushings with this Bronze Thrust Bushing Set of 2. Replace the cheaply made, worn-out factory swingarm bushings with a 2-piece set...
Honda CB750 CB550 CB500 CB450 swingarm grease fitting nipple (pk 2) 96201-30001

Honda CB Swingarm Grease Fitting Nipple (Pk/2)

$7.95 USD
73-0941
Replace your swingarm grease fittings with this Grease Fitting Nipple A .45 Pk/2. These fittings are used with the swingarm. Replaces OEM #96201-30001.Key Features•...
Honda CB750 CB550 CB500 swingarm dust seal cap (set 2) 52144-283-010

Honda CB Swingarm Dust Seal Cap (Set/2) ~ Replaces 52144-283-010

$9.95 USD
29-7024
Replace your swingarm dust seal caps with this Swingarm Dust Seal Metal Cap Set of 2. These metal caps fit on the ends of...
Comparer

1974 Honda CB450K · Swing Arm Parts Buying guide

Start the pivot-end check with the stated 1974 cap reference

Dust caps supply two and fit the pivot ends. Thrust bushings also supply two against 52109-283-300. Locknut 90354-268-000 comes with washer 90526-268-000. The individual shock-to-swingarm bushing is a different location with its own dimensions.

Parts to consider

Honda CB Swingarm Dust Seal Cap (Set/2) ~ Replaces 52144-362-000 Two pivot-end dust caps, 52144-362-000Explicit set of two for the listed 1974 application. Compare the actual cap requirement; full physical dimensions and every modified-pivot fit are not stated.Voir la pièce Honda CB Bronze Thrust Bushing Set/2 ~ Replaces 52109-283-300 Bronze thrust bushings, set of twoReplaces 52109-283-300. Check the retained pivot and required dimensions rather than treating the set as a complete swingarm service kit.Voir la pièce Honda CB Swingarm Pivot Bolt Locknut with Washer ~ Replaces 90354-268-000 Pivot locknut with its washerReferences 90354-268-000 and 90526-268-000. Identify other pivot components separately; a replacement pivot bolt or bushing assembly is not described as included.Voir la pièce

Pièces connexes : Individual shock mount bushing, 19 × 22 × 10mm · Left and right pivot felts, set of two

Verify the pivot-end caps against the retained assembly

The 1974 cap listing explicitly identifies 52144-362-000 and supplies two pivot-end pieces. Compare the fitted cap design and confirm missing dimensions if the swingarm was altered. Neither that reference nor the package count establishes interchange with every other dust cap or the inclusion of separate felts.

Check pivot bushings separately from shock mounting support

The thrust bushing set references 52109-283-300 and supplies two, without complete dimensional figures. The shock-to-swingarm bushing instead references 40548-268-000, measures 19mm long, 22mm OD and 10mm ID, and sells individually. Identify the actual position and fit needed before selecting between these different functions.

CB450K buying questions

Does the cap set provide the complete pivot-end sealing purchase?

The description explicitly supplies two 52144-362-000 caps for the pivot ends, without listing felts as included. The separately offered 52145-283-000 felts supply left and right pieces. Inspect the pivot arrangement and identify which matching parts the repair requires before ordering.

What should I obtain before selecting bronze bushings for a modified swingarm?

Identify the bushing type, reference and physical dimensions required by that pivot. Both bronze listings state two supplied pieces without every dimensional figure. Confirm the missing measurements for the altered assembly rather than treating material or motorcycle compatibility as proof of fit.

What remains to identify if the pivot bolt is missing as well as its nut?

The locknut purchase identifies 90354-268-000 with washer 90526-268-000, without a pivot bolt described as included. Establish the bolt and other components required by the fitted pivot separately. Do not use the washer or locknut reference to infer an unstated complete assembly.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1974 Honda CB450K

Votre panier

×