VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1974 Honda CB450K — Filtres à huile, bouchons, pompes et manomètres

Check the drain opening and rotor component separately when planning oil-service parts for your 1974 CB450K. The magnetic plug gives thread and clearance dimensions with an included O-ring. The angled rotor washer has its own reference, leaving missing dimensions and installation details to confirm.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Filtres à huile, bouchons, pompes et manomètres

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Nouveau
Épuisé
Honda CB500 CB450 joker machine magnetic oil drain plug 90013-312-000

Honda CB Joker Machine Magnetic Oil Drain Plug ~ Replaces 90013-312-000

$64.95 USD
12-0108
Catch engine debris between oil changes with this Joker Machine Magnetic Oil Drain Plug with O-ring, replacing OEM #90013-312-000. High-quality 6061 billet aluminum body...
Honda CB500 CB450 CB360 special oil filter rotor washer 90481-292-000

Honda CB Special Oil Filter Rotor Washer ~ Replaces 90481-292-000

$9.46 USD
29-7034
Replace your oil filter rotor washer with this Special Angled Oil Filter Rotor Washer (16mm), replacing OEM #90481-292-000.Key Features• Special angled oil filter rotor...
Comparer

1974 Honda CB450K · Oil Filters, Drain Plugs, Oil Pump & Gauges Buying guide

Match the drain connection and the rotor part independently

The plug specifies M33.7 × 1.5mm thread, 19mm socket, 45mm OD and 19mm off-case clearance. Rotor washer 90481-292-000 is angled and labeled 16mm without identifying what that size measures.

Parts to consider

Honda CB Joker Machine Magnetic Oil Drain Plug ~ Replaces 90013-312-000 Magnetic plug with included O-ringJoker Machine plug referencing 90013-312-000. Check its M33.7 × 1.5mm connection, 45mm OD and stated 19mm clearance off the case.Voir la pièce Honda CB Special Oil Filter Rotor Washer ~ Replaces 90481-292-000 Angled oil-filter rotor washerReplacement washer referencing 90481-292-000 and labeled 16mm. Confirm the component identity and any additional required measurements; no rotor assembly is named as included.Voir la pièce

Check connection and access as separate requirements

The plug’s thread, outside diameter and off-case dimension describe different fit checks. Compare the actual opening and adjacent parts on the installed engine before ordering, especially after modifications. The included O-ring does not establish unlimited clearance, and the 19mm socket size is not a thread specification or service torque.

Keep the magnetic function within its stated scope

The description identifies a magnet that captures steel debris. That function does not establish capture of every contaminant, replacement of the engine’s oil-filter arrangements or a diagnosis of engine condition. Keep any other service parts and checks in the order according to the actual engine requirements rather than assuming the plug supplies them.

Buying questions

What should I compare if the engine has a non-original drain arrangement?

Identify its actual thread and available clearance, then compare M33.7 × 1.5mm, 45mm OD and the stated 19mm off-case dimension. The original replacement reference alone does not verify an altered drain opening or the surrounding installation space.

How do I request the missing rotor-washer measurements?

Use reference 90481-292-000 and the removed angled washer when asking for the dimensions needed. The description labels it 16mm without defining that measurement. Confirm the required details instead of assuming inner diameter, thickness or installation orientation from the number.

What should I check before adding separate sealing parts to the plug order?

The magnetic plug expressly includes its own O-ring. Identify each other seal needed by component and reference, then compare confirmed purchase contents before adding it. That included O-ring does not establish a complete oil-service package or supply missing service specifications.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1974 Honda CB450K

Votre panier

×