VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1974 Honda CB450K — Allumage, contacteurs, bobines, bougies et rupteurs

Check the coil installation and service components on your 1974 CB450K before choosing replacements. Bracket spacing, wire exits and electrical ratings all affect the coil comparison. Plug caps need their own specifications, while left and right contact points remain separate reference-based purchases.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Allumage, contacteurs, bobines, bougies et rupteurs

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB500 CB450 CB350 CL350K0 CL350K1 ignition coil 30500-292-672

Honda CB Ignition Coil ~ Replaces 30500-292-672

$37.95 USD
17-6923
Replace your CB450/CL450, CB500T, or CB350/CL350/SL350 ignition coil with this Ignition Coil, replacing OEM #30500-292-672 / #30500-312-000 / #30500-286-004 / #30500-286-007 / #30500-310-670. 12V...
Honda CB500 CB450 CB360 CB350 CL350K0 condenser 30250-369-004

Honda CB Condenser ~ Replaces 30250-369-004

$21.95 USD
26-5106
Replace your condenser with this Condenser, replacing OEM #30250-369-004 / #30280-292-672 / #30280-292-671.Key Features• Condenser• Replaces OEM #30250-369-004 / #30280-292-672 / #30280-292-671• Honda part...
Nouveau
Honda CB500 CB450 CL450K0 contact point right side 30203-292-003

Honda CB Contact Point ~ Right Side ~ Replaces 30203-292-003

$14.95 USD
14-0007
Replace the right-side contact point on your CB500T or CB450/CL450 with this Contact Point for the Right Side, replacing OEM #30203-292-003 / #30203-292-154.Key Features•...
Nouveau
Honda CB500 CB450 CB160 CL450K0 contact point left side 30204-292-003

Honda CB Contact Point ~ Left Side ~ Replaces 30204-292-003

$14.95 USD
14-0008
Match with the left-side contact point using this Contact Point for the Left Side, replacing OEM #30204-292-003 / #30204-292-154. Same fitment as 14-0007 plus...
Universal motorcycle spark plug cap VB05F

Universal Motorcycle Spark Plug Cap ~ VB05F

$9.50 USD
23-3124
Universal Motorcycle Spark Plug Cap ~ VB05F is an aftermarket part for the Honda CB applications listed in this product information. Before ordering, confirm...
Voir les détails
Honda CB500 CB450 spark plug cap YB05F

Honda CB500/CB450 Spark Plug Cap ~ YB05F

$10.95 USD
23-3120
Spark Plug Cap - YB05F for custom or restoration work on classic Honda CB motorcycles.  Key Features Aftermarket part Sold as: Each Fitment /...
Voir les détails
Comparer

1974 Honda CB450K · Ignition Systems, Coils & Plugs Buying guide

Compare mounting orientation with the complete wire layout

The 12V coil has 5-ohm primary resistance, one output and approximately 80mm mounting centres. Its beige-Honda-coil note requires reversed mounting. Both cap products are sold individually without a resistance figure; point sides and condenser references must be matched separately.

Parts to consider

Honda CB Ignition Coil ~ Replaces 30500-292-672 Coil with attached wires and a mounting noteCoil supplies a 19-inch plug wire, 6.5-inch blue lead with dual female bullet connector and 5.25-inch black/white lead with male bullet connector. Sold individually. Match the approximately 80mm mounting centres and the beige-coil reversed-mounting requirement together.Voir la pièce Universal Motorcycle Spark Plug Cap ~ VB05F VB05F cap with electrical details to confirmAftermarket cap sold individually for the named Honda applications. Compare the retained plug and ignition-lead attachment and establish the required electrical specification. The description gives no resistance value or complete terminal-dimension drawing.Voir la pièce Honda CB500/CB450 Spark Plug Cap ~ YB05F YB05F individually sold cap optionAftermarket YB05F cap described for custom or restoration work. Match its connection to the actual plug and lead before choosing quantity. Resistance and complete connection dimensions are not specified, so confirm the details required by the retained ignition.Voir la pièce

Pièces connexes : Left point under 30204-292 replacement references · Right point under 30203-292 replacement references · Condenser references and retained-connection comparison

Assess the coil on an altered bracket without relying on spacing alone

The coil comes with its leads already attached, and the beige-coil note changes its installation direction. Compare wire reach and bullet ends with the required paths after confirming bracket spacing. A bracket modified during earlier work still needs both mechanical and connection checks.

Identify separate point and condenser coverage

The left point lists 30204-292-003 / 30204-292-154, and the right lists 30203-292-003 / 30203-292-154. Condenser references are 30250-369-004 / 30280-292-672 / 30280-292-671. Confirm each purchase’s supplied quantity when planning service at more than one position.

Matching the ignition installation before ordering

What should I compare before replacing a beige coil on a changed bracket?

The replacement requires reversed mounting because the wire exits differ. Compare the actual bracket, approximately 80mm centres, all stated lead lengths and connector paths in that orientation. Establish the missing attachment details where a previous bracket change affects the installation.

How should I choose a cap when the ignition system has been changed?

Confirm the new ignition’s required cap resistance and plug/lead attachment, then establish the chosen cap’s specifications. VB05F and YB05F listings give no resistance figure. Their application lists do not determine every requirement of an ignition substituted during earlier work.

What information should I retain when renewing only one contact point?

Record the removed component’s side and reference and compare its attachment. Left 30204-292 and right 30203-292 products have distinct references. Confirm supplied quantity separately if other ignition components will also be renewed.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1974 Honda CB450K

Votre panier

×