VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1974 Honda CB450K — Disques et ressorts d’embrayage

Compare the friction plates, steel plates and locking hardware in your 1974 CB450K’s retained clutch before preparing the order. The application states different piece requirements for each plate type. Confirm supplied quantities and any washer dimensions needed for the repair rather than assuming complete packs.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Disques et ressorts d’embrayage

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB1100 CB1000 CB900 CB750 CB500 clutch tab washer 90431-292-000

Honda CB Clutch Tab Washer ~ Replaces 90431-292-000

$7.50 USD
73-0839
Replace your clutch tab washer with this Clutch Washer, 16mm size, replacing OEM #90431-292-000.Key Features• Clutch tab washer• 16mm size• Replaces OEM #90431-292-000• Honda...
Honda CB750 CB700 CB500 CB450 CL450K0 steel clutch plate 22321-MG8-000

Honda CB Steel Clutch Plate ~ Replaces 22321-MG8-000

$11.95 USD
39-1409
Replace your SOHC CB750, CB700SC Nighthawk, CB500T, or CB450/CL450 steel clutch plate with this Steel Clutch Drive Plate, replacing OEM #22321-MG8-000 / #22321-283-000.Order the...
Honda CB1000 CB500 CB450 CL450K0 clutch friction plate 22201-MA7-000

Honda CB Clutch Friction Plate ~ Replaces 22201-MA7-000

$8.95 USD
39-1046
Replace your clutch friction plates with this Clutch Friction Plate, replacing OEM #22201-MA7-000 / #22201-283-000.Order the number of pieces required for your model.Key Features•...
Comparer

1974 Honda CB450K · Clutch Plates & Springs Buying guide

Turn the identified clutch requirement into a confirmed purchase quantity

The CB450K application names seven friction plates and six steel plates. Those are pieces used per bike, without explicit supplied-pack counts. Washer 90431-292-000 is a separate locking part described as 16mm, so compare its retained attachment and any missing measurements independently.

Parts to consider

Honda CB Clutch Friction Plate ~ Replaces 22201-MA7-000 Friction plate with seven-piece application countPlate references Honda 22201-MA7-000 / 22201-283-000. Seven pieces per CB450K are stated, without an explicit supplied seven-piece pack. Confirm pieces per purchase and compare the retained clutch before calculating a partial or complete plate order.Voir la pièce Honda CB Steel Clutch Plate ~ Replaces 22321-MG8-000 Steel plate with six-piece application countDrive plate references Honda 22321-MG8-000 / 22321-283-000, with six pieces per CB450K stated. The description asks for required pieces without naming a supplied six-piece set. Establish the purchase quantity separately from that model requirement.Voir la pièce Honda CB Clutch Tab Washer ~ Replaces 90431-292-000 Locking tab washer offered as a separate partWasher references Honda 90431-292-000 with a 16mm size label. Compare the removed locking part and confirm any additional dimensions needed by the clutch retained. Plate descriptions do not name the washer as included in their supplied contents.Voir la pièce

Check purchased pieces before calculating the complete set

Seven friction and six steel pieces are the stated CB450K requirements. Confirm how many pieces are supplied by each purchase and count the components selected for renewal. If the clutch was changed earlier, identify that assembly and its requirements before applying these motorcycle-specific counts.

Define locking and spring work outside plate-package assumptions

The tab washer has its own reference and 16mm label, without a full drawing. Compare the removed part and confirm any additional dimension needed by altered hardware. Neither plate description itemizes this washer or replacement springs as supplied, so establish those repair needs separately.

Clutch plate coverage and retained-hardware checks

What should I confirm before ordering all the friction and steel plates together?

Identify the retained clutch and match each plate type and reference. The descriptions state seven friction and six steel pieces used per CB450K but do not name supplied packs of those sizes. Confirm pieces per purchase before calculating the complete order.

How should plate requirements be checked after an earlier clutch modification?

Identify the clutch and actual plate types and quantities required by that assembly. Compare them with the offered references before choosing replacements. The application counts describe the listed CB450K arrangement, without identifying every modified stack or substituted clutch.

What should I measure if the old tab washer differs from the offered shape?

Compare reference 90431-292-000 and the locking attachment on the clutch retained. The 16mm label does not specify every dimension or identify which measurement it represents. Confirm the missing dimensions needed to resolve that shape difference before selecting the washer.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1974 Honda CB450K

Votre panier

×