Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

Consultation en cours Amortisseurs

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB OEM Type Shock Absorber Nut ~ Replaces 90309-315-000

$3.95 USD
49-0779
Replace your shock absorber nuts with this Shock Absorber Nut, a replica of the OEM type used when installing shocks. Replaces OEM #90309-315-000.Note: 2...

Honda CB Shock Absorber Joint Rubber Set/2 ~ Replaces 52484-292-000

$6.76 USD
73-0093
Replace your shock joint rubbers with this Shock Absorber Joint Rubber Set of 2, replacing OEM #52484-292-000.Key Features• Shock absorber joint rubbers• Set of...

Universal Motorcycle Shorty Shock Absorber Set ~ Chrome Shrouded 290mm

$119.95 USD
06-3591
Drop the back end with a clean all-chrome look using this Custom Shorty Shock Absorber Set. Chrome body and shroud with chrome progressive-wound springs,...

Honda CB Stock Length Shock Absorber Set ~ Black 335mm

$139.95 USD
06-3598
Stick with stock geometry but blacked out with this All-Black Stock-Length Shock Absorber Set. Black body, black progressive-wound heavy-duty springs, and a black end...

Honda CB Stock Length Shock Absorber Set ~ Chrome 335mm

$139.95 USD
06-3623
Go with a clean all-chrome stock-length setup without the end-cap detail using this Stock-Length Shock Absorber Set. Chrome body with chrome progressive-wound heavy-duty springs,...
Nouveau
Honda CB chrome 335mm shock absorber set side detail

Honda CB Stock Length Shock Absorber Set ~ Chrome 335mm

$139.95 USD
06-3588
Step up to a clean chromed-out rear end with this All-Chrome Stock-Length Shock Absorber Set. Features a chrome body, chrome progressive-wound heavy-duty springs, and...

Universal Motorcycle Shorty Shock Absorber Set ~ Black Shrouded 290mm

$129.95 USD
06-3590
Get the shortened look with a bit more coverage using this Custom Shorty Shock Absorber Set featuring a black body and shroud with black...

Honda CB Stock Length Shock Absorber Set ~ Black / Chrome 335mm

$139.95 USD
06-3603
Mix a blacked-out body with chromed-out springs using this Stock-Length Shock Absorber Set. Black body paired with chrome progressive-wound heavy-duty springs, a sharp two-tone...
Épuisé
Universal black 290mm eye-to-eye shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black Eye-to-Eye 290mm

$139.95 USD
06-3592
Go shorter with a different mounting configuration using this Custom Shorty Shock Absorber Set. Black body and shroud with black progressive-wound springs, 290mm (11...

Honda CB Stock Design Shock Absorber Set ~ Chrome 321mm

$139.95 USD
06-3642
Restore factory-look rear suspension with this Stock-Design Shock Absorber Set, modelled after the original OEM shocks on a range of CB500, CB550, CB450/CL450, and...
Épuisé
Universal black 290mm shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black 290mm

$139.95 USD
06-3589
Slam the back end with this Custom Shorty Shock Absorber Set, measuring 290mm (11 3/8") eye-to-clevis, noticeably shorter than stock for custom café, bobber,...

1971 Honda CB450K · Shock Absorbers Buying guide

Check length, mounting form and fastening needs before finish

Chrome stock-design shocks list 321mm and five preload positions. The 335mm sets list four positions and included mounting hardware. The custom shorty family contains eye-to-clevis and eye-to-eye choices. Compare the exact set before selecting separate nuts or rubbers.

Match the shock measurements to the intended setup

The stock-design and stock-length families are described at 321mm and 335mm respectively. Compare the installed shocks and candidate’s measurement method, mounts and replacement references. Neither product name establishes the CB450K’s original length, nor does it guarantee preserved clearance or ride height when a different dimension is selected.

Identify fastening contents without transferring them across sets

The 335mm sets explicitly list bushings, inserts, washers and a wrench. The separate OEM-type nut uses reference 90309-315-000 and states two required per motorcycle, without a clear pack count. Check what the mounting needs and confirm each product’s contents before deciding which separate hardware to add.

CB450K buying questions

Does the OEM-type nut’s two-per-bike wording confirm a supplied pair?

It describes the required count on the motorcycle, not a clear package quantity. The nut replaces 90309-315-000. Confirm how many the order supplies and compare the fastening requirement of the shocks fitted before buying for both positions.

Are lower mounting dimensions fully given for the custom clevis shocks?

The eye-to-clevis shorty listings give a 12mm ID × 21mm upper bushing but omit lower clevis opening width and bolt diameter. Compare the actual lower mount and confirm those measurements before selecting a 290mm custom set.

Can a black eye-to-eye shorty set be treated as the same mount as the clevis set?

The eye-to-eye version gives 10mm ID × 21mm bushings at both ends. Eye-to-clevis shorty versions instead state a 12mm ID × 21mm upper bushing and a lower clevis. Check the exact layout; similar finish and length do not establish interchangeability.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité

Votre panier

×