VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1971 Honda CB450K — Repose-pieds, sélecteurs, kicks et béquilles

Compare the footrest coverings and retaining hardware on your 1971 CB450K before selecting a rubber or pin set. The footrest and passenger rear rubber listings use different references. Check the shift covering and stand components separately to choose the parts needed for the repair.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Repose-pieds, sélecteurs, kicks et béquilles

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB kick stand stopper rubber 95011-61000

Honda CB Kick Stand Stopper Rubber ~ Replaces 95011-61000

$2.95 USD
07-4624
Replace a worn kick stand stopper with this Kick Stand Stopper Rubber "A", a direct replacement for OEM #95011-61000. Exceptionally broad fitment across the...
Honda CB1000 CB900 CB750 CB650 side stand spring 95014-72402

Honda CB1000/CB900/CB750/CB650 Side Stand Spring

$3.95 USD
49-0788
Replace your side stand spring with this Side Stand Spring, replacing OEM #95014-72402.Key Features• Side stand spring• Replaces OEM #95014-72402• Honda part name: Spring...
Épuisé
Honda CB gear shift lever rubber 95011-40000

Honda CB Gear Shift Lever Rubber ~ Replaces 95011-40000

$2.95 USD
02-2478
Replace a cracked, hardened, or missing gear shift rubber with this Gear Shift Rubber, a direct replacement for OEM #95011-40000. Fits an exceptionally broad...
Honda CB750 CB650 CB550 side stand pivot bolt and nut set 90108-283-000

Honda CB Side Stand Pivot Bolt & Nut Set ~ Replaces 90108-283-000

$4.61 USD
73-0893
Replace your side stand pivot hardware with this Side Stand Pivot Bolt & Nut Set, used to fasten the side stand in place. Replaces...
Honda CB footrest rubber set of 2 50661-310-000

Honda CB Footrest Rubber Set/2 ~ Replaces 50661-310-000

$13.95 USD
02-2475
Replace worn or split footrest rubbers with these Footrest Rubbers, a 2-piece set replacing OEM Ref. #50661-310-000 / #50661-312-000 / #50661-000-000. Fits the early-'70s...
Honda CB750 CB550 CB500 CB450 CB350 passenger rear footrest rubber set 95011-31000

Honda CB Passenger Rear Footrest Rubber Set

$14.95 USD
73-0185
Replace your passenger rear footrest rubbers with this Passenger Rear Footrest Rubber Set of 2, replacing OEM #95011-31000.Key Features• Passenger rear footrest rubbers• Set...
Honda CB1000 CB900 CB750 passenger rear footpeg pin and cotter pin set 95015-83000

Honda CB Passenger Rear Footpeg Pin & Cotter Pin Set

$7.00 USD
73-0945
Replace your passenger rear footpeg pins with this Passenger Rear Footpeg Pin & Cotter Pin Set. Includes 2 footpeg pins and 2 cotter pins....
Comparer

1971 Honda CB450K · Foot Pegs, Gear Lever, Kick Starter, Side Stand & Center Stand Buying guide

Use the fitted peg and reference to choose each rubber set

Both rubber sets supply two pieces, while the passenger pin set contains two pins and two cotter pins. The gear shift rubber, stand pivot hardware and stand stopper serve other locations. Keep their contents and fit checks separate.

Parts to consider

Honda CB Footrest Rubber Set/2 ~ Replaces 50661-310-000 Two footrest rubbersSet of two referencing 50661-310-000 / 50661-312-000 / 50661-000-000. Compare the original rubber and fitted peg; the description does not specify every footrest position.Voir la pièce Honda CB Passenger Rear Footrest Rubber Set Two passenger rear rubber coveringsPassenger rear set replacing 95011-31000. Compare the pegs fitted, especially after a previous footrest change.Voir la pièce Honda CB Passenger Rear Footpeg Pin & Cotter Pin Set Two passenger pins and two cotter pinsPassenger footpeg retaining set referencing 95015-83000. Its listed contents are separate from rubber coverings or complete replacement pegs.Voir la pièce

Pièces connexes : Shift lever rubber, reference 95011-40000 · Side stand pivot bolt and nut · Stand stopper rubber A

Compare the rubber references before counting sets

The footrest product supplies two rubbers against three stated replacement references; the passenger rear product supplies two against 95011-31000. Identify the original covering and its mounting arrangement. Their shared model application and set quantity do not establish the shapes as substitutes for one another.

Inspect the stand components independently

The pivot hardware set states bolt 90108-283-000 and nut 94002-10000-0S, whereas the stopper uses 95011-61000. Check the stand, bracket and stopper mount before building the order. Neither purchase confirms a complete stand supplied, and stopper dimensions and package quantity are not clearly stated.

CB450K buying questions

Does the general footrest listing identify a front or passenger position?

It describes footrest rubbers and gives three replacement references, without naming every peg position. The separate passenger rear listing explicitly identifies its location. Match the rubber and peg actually fitted rather than assigning a position from the set quantity.

Are the rubber coverings supplied with the passenger retaining pins?

The retaining set explicitly contains two footpeg pins and two cotter pins. Passenger rubber coverings are a separate set of two. Inspect both components and decide whether the repair needs replacement retaining hardware, coverings or both purchases.

Can I verify a modified stand mount from the stopper dimensions online?

The stopper description gives function and reference 95011-61000 but no exact mounting dimensions. Compare the fitted stopper arrangement and confirm the required measurements when the bracket or stand has changed. The original model application does not identify a custom mount.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1971 Honda CB450K

Votre panier

×