VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1971 Honda CB450K — Flotteurs et composants de carburateur

Match the separate float or drain screw to the carburetor retained on your 1971 CB450K. The float purchase includes a pin, and the drain screw purchase includes an O-ring. Compare their locations and contents before adding individual quantities to a wider carburetor repair order.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Flotteurs et composants de carburateur

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB550 CB500 CB450 CB400 float bowl drain screw

Honda CB Stock Type Float Bowl Drain Screw

$7.50 USD
48-5041
Replace your stock-type float bowl drain screw with this Float Bowl Drain Screw with O-Ring.Note: sold each, order the quantity you require.Key Features• Stock-type...
Honda CB500 CB450 CL450K0 CL450K2 CL450K3 carb float 16013-283-004

Honda CB Carb Float ~ Replaces 16013-283-004

$17.95 USD
20-6512
Replace your CB500T or CB450/CL450 carb float with this Carb Float with Pin, replacing OEM #16013-283-004.Sold each, order the quantity your bike requires.Key Features•...
Comparer

1971 Honda CB450K · Carb Floats & Other Carb Components Buying guide

Identify the component by its location and contents

A float-and-pin assembly is different from the float-valve needle and seat. A bowl drain screw is another fitting with its own seal. Both products here are sold each, so their purchase counts follow the parts being renewed rather than the scope of a carburetor kit.

Parts to consider

Honda CB Stock Type Float Bowl Drain Screw Sealed float-bowl drain screwThe written contents specify a drain screw with O-ring, sold each. Compare the retained bowl, screw and seal arrangement. No thread dimensions are given for assessing a bowl fitted during earlier modifications.Voir la pièce Honda CB Carb Float ~ Replaces 16013-283-004 Carburetor float including pinFloat-and-pin replacement referencing Honda 16013-283-004. Sold individually; count the floats being renewed. Compare the installed assembly and keep this purchase separate from the needle-and-seat valve components.Voir la pièce

Check the float repair alongside the chosen kit

The premium rebuild kit includes float needle and seat components but does not list a replacement float. The separate float names its pin as included. Read the parts required by the actual repair before adding a float, a valve set or both to a kit purchase.

Use the installed bowl to resolve the drain fitting

No thread diameter, pitch or complete sealing-seat dimensions are stated for the drain screw. Compare the retained bowl and removed screw, especially if the carburetor or bowl was replaced. Confirm missing measurements needed for that assembly instead of choosing from the stock-type name alone.

Questions to help choose the repair parts

Is the float pin listed with the replacement float?

The float description explicitly names a float with pin, sold each. Check that assembly against the retained carburetor and order the number being renewed. A separate valve set describes a needle and seat rather than the float-pin assembly.

What if the bowl drain thread cannot be identified?

Establish the thread and seal arrangement in the bowl before ordering the replacement screw. Its description does not give those dimensions. Confirm the missing specification when a changed bowl cannot be matched from the existing fitting.

Should I add a replacement float to a rebuild-kit order?

The premium kit lists a float needle and seat but does not list a replacement float. The separate float includes its pin and is sold individually. Inspect the existing float and compare kit contents before adding the parts needed for that carburetor.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1971 Honda CB450K

Votre panier

×