VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1971 Honda CB450K — Câbles

Prepare a cable order for your 1971 CB450K from the drive and instrument actually fitted. The listed replacement is black, made in Japan and 38.5 inches end-to-end. The protective gear plug is a separate component whose dimensions apply to a different fit check.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Câbles

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB550 CB500 CB450 CB400 speedometer cable 44830-425-870

Honda CB Speedometer Cable ~ Replaces 44830-425-870

$22.66 USD
51-2304
Replace your CB speedometer cable with this Speedometer Cable in black, replacing OEM #44830-425-870. End-to-end length 38.5". Made in Japan.Key Features• Speedometer cable, black•...
Honda CB1000 CB900 CB750 CB650 speedo gear plug

Honda CB1000/CB900/CB750/CB650 Speedo Gear Plug

$43.95 USD
29-0538
Keep your speedo drive gear clean with this Speedo Gear Plug, 15mm outer diameter, 22mm long.Key Features• Speedo gear plug• 15mm outer diameter, 22mm...
Comparer

1971 Honda CB450K · Cables Buying guide

Check end fit and required reach together

The cable reference is Honda 44830-425-870. Its exact end-thread and drive-tip dimensions are not given. The plug measures 15mm outer diameter by 22mm length and is described for keeping the original speedo drive gear clean.

Parts to consider

Honda CB Speedometer Cable ~ Replaces 44830-425-870 38.5-inch cable referenced to Honda 44830-425-870Black Japanese-made replacement with stated end-to-end length. Confirm the needed reach and both end interfaces, especially when the drive or instrument has changed.Voir la pièce Honda CB1000/CB900/CB750/CB650 Speedo Gear Plug 15mm × 22mm protective gear plugListed dimensions are 15mm outer diameter and 22mm length. Its purpose is drive-gear protection; check the fitted opening instead of treating it as a cable.Voir la pièce

Measure for the arrangement you will retain

A relocated instrument or altered handlebar position can change the cable reach needed. Compare that arrangement with the replacement’s 38.5-inch end-to-end length. Identify the fitted drive and gauge when checking the end connections, which are not dimensioned in this description.

Use the plug measurements for the protective part

The 15mm and 22mm measurements belong to the gear plug, not to cable ends or an instrument drive ratio. Compare them with the actual opening and the protection required. The listing does not establish a conversion kit or a substitute for missing speedometer drive components.

Buying questions

What should I check when keeping the original drive but fitting a custom gauge?

Confirm cable compatibility at both the retained drive and the new instrument, together with the required reach. This description does not give the end dimensions needed to prove the custom pairing. Verify the instrument’s mechanical specification independently of the cable purchase.

Which cable dimensions are provided in the listing?

The black, Japanese-made cable is listed at 38.5 inches end-to-end and replaces Honda 44830-425-870. Exact end-thread and drive-tip dimensions are not given. Confirm both connections when the wheel drive or instrument has been changed.

What if the cable length suits my old layout but the gauge has moved?

Check the reach needed by the intended new arrangement instead of reusing the old layout’s measurement as proof. Compare it with the stated 38.5-inch end-to-end length and confirm both end connections. The model-year application does not establish every custom cable path.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1971 Honda CB450K

Votre panier

×