VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1966 Honda CB450K Black Bomber — Amortisseurs

Start a custom shock order for your 1966 CB450K by identifying both mounting ends. The 290mm options include eye-to-clevis and eye-to-eye configurations with different bushing dimensions. Confirm the mounting arrangement and clearance before deciding on chrome, black or a shrouded finish.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Amortisseurs

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Universal chrome shrouded 290mm shock absorber set side detail

Universal Motorcycle Shorty Shock Absorber Set ~ Chrome Shrouded 290mm

$119.95 USD
06-3591
Drop the back end with a clean all-chrome look using this Custom Shorty Shock Absorber Set. Chrome body and shroud with chrome progressive-wound springs,...
Universal black shrouded 290mm shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black Shrouded 290mm

$129.95 USD
06-3590
Get the shortened look with a bit more coverage using this Custom Shorty Shock Absorber Set featuring a black body and shroud with black...
Épuisé
Universal black 290mm eye-to-eye shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black Eye-to-Eye 290mm

$139.95 USD
06-3592
Go shorter with a different mounting configuration using this Custom Shorty Shock Absorber Set. Black body and shroud with black progressive-wound springs, 290mm (11...
Épuisé
Universal black 290mm shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black 290mm

$139.95 USD
06-3589
Slam the back end with this Custom Shorty Shock Absorber Set, measuring 290mm (11 3/8") eye-to-clevis, noticeably shorter than stock for custom café, bobber,...
Comparer

1966 Honda CB450K · Shock Absorbers Buying guide

Compare each shock end before choosing a finish

The common 290mm specification does not make the mounting types interchangeable. Each listing is for a custom shorty application, with five-position spring preload adjustment; no stock CB450K replacement length is established here.

Parts to consider

Universal Motorcycle Shorty Shock Absorber Set ~ Chrome Shrouded 290mm Chrome shrouded eye-to-clevis shocks290mm custom shocks with chrome body, shroud and springs. Upper bushing specification is 12mm ID × 21mm; compare the lower clevis with the installed mount.Voir la pièce Universal Motorcycle Shorty Shock Absorber Set ~ Black Shrouded 290mm Black shrouded eye-to-clevis shocksBlack body, shroud and springs with 290mm eye-to-clevis mounting. The upper bushing is listed as 12mm ID × 21mm, with five-position spring preload.Voir la pièce Universal Motorcycle Shorty Shock Absorber Set ~ Black Eye-to-Eye 290mm Black eye-to-eye custom shocksThe separate 290mm eye-to-eye configuration uses 10mm ID × 21mm bushings at both ends. Its lower eye is different from the clevis on the other options.Voir la pièce

Pièces connexes : Black eye-to-clevis shocks

Complete the lower mount comparison

The eye-to-clevis descriptions state the upper bushing dimensions but do not state a clevis opening width or lower bolt diameter. Confirm those measurements against the mount on your build before ordering. An upper bushing match alone does not verify the lower attachment.

Treat the custom application as a separate decision

Choose a mounting type and verify dimensions before selecting the finish or preload feature. These listings describe 290mm shorty shocks for custom use. If your goal is an original-length restoration, the listing does not establish that any of these options supplies that specification.

CB450K buying questions

Can I choose by the 290mm length alone?

No. The eye-to-clevis versions list a 12mm upper bushing ID, while the eye-to-eye version lists 10mm at both ends. Compare both attachment types and the installed hardware as well as the length.

Where can I find the lower clevis width in these listings?

The descriptions do not state the lower clevis opening width or lower bolt diameter. They provide the upper bushing specification. Confirm the missing lower dimensions before ordering if the application depends on that comparison.

Does the eye-to-eye version use the same bushings as the clevis versions?

Its stated bushings are 10mm ID × 21mm at the upper and lower eyes. The eye-to-clevis versions instead list a 12mm ID × 21mm upper bushing. Do not assume the mounting hardware is interchangeable.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1966 Honda CB450K Black Bomber

Votre panier

×