VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1976 Honda CB550K — Outils pour fourche et suspension

A split seal driver and a cap wrench cover two different fork-service tasks for the 1976 Honda CB550K. Choose the driver by the fitted fork diameter. Choose the wrench by the cap’s actual tool size, especially when replacement caps or forks have been fitted.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Outils pour fourche et suspension

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB650 CB550 CB500 35 36mm fork seal driver

Honda CB750 / CB650 / CB550 / CB500 35/36mm Fork Seal Driver

$49.95 USD
35-4299
Install 35mm or 36mm fork seals cleanly with this 35/36mm Fork Seal Driver. High-quality carbon steel with split design. Use for easy installation of...
Honda CB750 CB550 fork cap wrench 24mm

Honda CB750 / CB550 Fork Cap Wrench ~ 24mm

$7.00 USD
35-9116
Remove 24mm fork caps without damage with this 24mm Non-Marring Fork Cap Wrench. Fits all motorcycles with 24mm fork caps. Lets you remove fork...
Comparer

1976 Honda CB550K · Fork & Suspension Tools Buying guide

Match each tool to a different fork-service point

The driver is listed for 35mm or 36mm fork seals. The wrench is listed for 24mm fork caps. These measurements describe different tool applications and should not be treated as interchangeable fork-size information.

Parts to consider

Honda CB750 / CB650 / CB550 / CB500 35/36mm Fork Seal Driver Split 35/36mm fork seal driverSplit carbon-steel seal driver listed for 35mm or 36mm forks, including the listed CB550K application.Voir la pièce Honda CB750 / CB550 Fork Cap Wrench ~ 24mm 24mm fork cap wrenchWrench listed for stock 24mm fork caps on CB550K. Compare the actual cap before ordering for changed forks.Voir la pièce

Do not confuse tube diameter with cap size

The seal driver’s 35/36mm sizing concerns its fork application. The wrench’s 24mm sizing concerns the cap it engages. A fork diameter label does not prove the external cap size, particularly with replacement caps. Check each measurement independently instead of buying a tool from one number alone.

Keep tools separate from the replacement parts

The driver and cap wrench are service tools. Their descriptions do not supply fork seals, cap O-rings or other replacement components with the tool. Plan the required parts from their own listings and use the relevant fork instructions when deciding which tools are appropriate for the job.

Common questions

Can the 24mm wrench be chosen from fork diameter?

No. The wrench listing specifies 24mm caps, while the driver listing specifies a 35mm or 36mm fork application. Check the cap’s actual wrenching size. Different tube and cap measurements should not be substituted for one another.

Does the seal driver include replacement seals?

The listing describes a split carbon-steel driver for 35mm or 36mm fork seal work. Replacement seals are a separate product selection. Compare the driver application and the required seal dimensions independently before planning the service order.

Will the listed wrench fit custom fork caps?

The description names stock 24mm caps. A changed cap or fork may present a different tool engagement. Compare the cap itself and its product information before choosing this wrench rather than assuming the motorcycle’s model label settles the tool size.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1976 Honda CB550K

Votre panier

×