VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1974 Honda CB550K — Outils pour moteur, direction et embrayage

The usable workshop choices here are a cap wrench and a split seal driver for listed CB550K forks. Their dimensions describe different working interfaces. Identify the fitted caps and forks first, especially after replacement, rather than selecting both tools from one measurement.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Outils pour moteur, direction et embrayage

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB1100 CB1000 CB900 CB750 oil filter wrench

Honda CB1100/CB1000/CB900/CB750 Oil Filter Wrench

$14.95 USD
35-9022
Remove and install spin-on oil filters with this 3/8" Drive Tripod Oil Filter Wrench. Designed for our aftermarket spin-on cartridge oil filters.Key Features• 3/8"...
Honda CB750 CB650 CB550 CB500 35 36mm fork seal driver

Honda CB750 / CB650 / CB550 / CB500 35/36mm Fork Seal Driver

$49.95 USD
35-4299
Install 35mm or 36mm fork seals cleanly with this 35/36mm Fork Seal Driver. High-quality carbon steel with split design. Use for easy installation of...
Honda CB750 CB550 fork cap wrench 24mm

Honda CB750 / CB550 Fork Cap Wrench ~ 24mm

$7.00 USD
35-9116
Remove 24mm fork caps without damage with this 24mm Non-Marring Fork Cap Wrench. Fits all motorcycles with 24mm fork caps. Lets you remove fork...
Universal motorcycle fork cap wrench 35mm

Universal Motorcycle Fork Cap Wrench ~ 35mm

$7.00 USD
35-9113
Fork Cap Wrench ~ 35MM Size for custom or restoration work on classic Honda CB motorcycles.  Key Features Aftermarket part Sold as: Each Fitment...
Voir les détails
Comparer

1974 Honda CB550K · Engine, Steering & Clutch Tools Buying guide

Compare cap hex and seal-driver application independently

The wrench description identifies stock 24mm CB550K caps. The driver has 35/36mm applications and places CB550K under 35mm forks. Use the corresponding component for each comparison instead of reading fork diameter as a wrench size.

Parts to consider

Honda CB750 / CB550 Fork Cap Wrench ~ 24mm 24mm fork cap wrenchThe description expressly lists stock 24mm CB550K caps. Compare the cap hex, especially if caps or forks have been replaced.Voir la pièce Honda CB750 / CB650 / CB550 / CB500 35/36mm Fork Seal Driver 35/36mm fork seal driverSplit carbon-steel driver with CB550K 1974–78 listed under its 35mm fork application. Identify any replacement forks before selecting the tool.Voir la pièce

Let the cap listing settle the wrench comparison

The 24mm wrench specifically lists stock CB550K caps for 1974–78. Another cap-wrench listing gives 35mm with broad model coverage, which conflicts with that stock-cap statement. Compare the actual cap hex and clarify any replacement-cap requirement rather than assuming the two sizes are alternate stock choices.

Keep the installation tool distinct from the replacement seal

The driver is described as split carbon steel for stated 35/36mm use, with the CB550K under the 35mm fork entry. It is service equipment, not a replacement seal set. Identify the fitted forks and select any seals separately from their own dimensions and application details.

Common questions

Does fork tube diameter identify the cap wrench size?

The cap wrench and seal driver specify different working dimensions. Use the cap hex for the wrench comparison and the listed fork application for the driver. A 35mm fork entry does not establish a 35mm cap hex.

Is an oil-filter tool selected for the CB550K here?

The oil wrench description covers specified aftermarket spin-on filters on other listed Honda models and does not identify a CB550K application. No compatibility with this bike’s filter arrangement is inferred. Choose filter-service equipment from the actual housing and verified tool information.

Does the seal driver work on 35mm forks?

Yes. The 35/36mm fork seal driver lists 35mm forks on the CB550K from 1974 to 1978. Its split design suits conventional or inverted forks, according to the listing.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1974 Honda CB550K

Votre panier

×