VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1974 Honda CB550K — Flotteurs et composants de carburateur

The 1974 Honda CB550K small-parts selection supports a focused carburetor repair with floats and pins, a screw kit, an individual bowl drain screw and a preset setting gauge. Check the old component and the stated contents before deciding what to replace.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Flotteurs et composants de carburateur

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB550 CB500 float bowl drain screw o-rings pk 4

Honda CB750 / CB550 / CB500 Float Bowl Drain Screw O-Rings Pk/4

$5.95 USD
48-0793
Replace your float bowl drain screw with O-ring on these earlier models with this Float Bowl Drain Screw with O-Ring 4-Pack.Key Features• Float bowl...
Honda CB1100 CB1000 CB900 CB750 CB550 air screw needle o-ring

Honda CB Air Screw Needle O-Ring

$1.95 USD
48-5043
Replace your air screw needle O-ring with this Air Screw Needle O-Ring, 2.8mm x 1.2mm.Note: sold each, order the quantity you require.Key Features• Air...
Honda CB750 CB550 CB500 CB450 CB400 float bowl drain screw

Honda CB Stock Type Float Bowl Drain Screw

$7.50 USD
48-5041
Replace your stock-type float bowl drain screw with this Float Bowl Drain Screw with O-Ring.Note: sold each, order the quantity you require.Key Features• Stock-type...
Honda CB750 CB550 CB500 CB360 throttle adjusting bolt 53190-300-000

Honda CB Throttle Adjusting Bolt ~ Replaces 53190-300-000

$9.95 USD
73-0846
Replace your throttle adjusting bolt with this Throttle Adjusting Bolt, replacing OEM #53190-300-000.Key Features• Throttle adjusting bolt• Replaces OEM #53190-300-000• Honda part name: Bolt,...
Honda CB750 CB550 CB500 CB360 throttle adjusting spring 53191-300-000

Honda CB Throttle Adjusting Spring ~ Replaces 53191-300-000

$9.50 USD
73-0847
Replace your throttle adjusting spring with this Throttle Adjusting Spring, replacing OEM #53191-300-000.Key Features• Throttle adjusting spring• Replaces OEM #53191-300-000• Honda part name: Spring,...
Nouveau
Honda CB550F CB550K CB500K CB500T carburetor screw kit

1971-77 Honda CB550 / CB500 Carburetor Screw Kit

$17.50 USD
49-0773
Refresh your CB500 or CB550 carb screws with this Carburetor Screw Kit. Get a new set of screws to clean up the look of...
Honda CB750 CB550 CB400 CB350 Keihin pd carburetor felt throttle shaft seal set 6

Honda CB750 / CB550 / CB400 / CB350 Keihin PD Carburetor Felt Throttle Shaft Seal Set/6

$21.95 USD
33-0045
Replace worn or missing felt throttle shaft seals during carburetor service on compatible vintage Honda CB models with Keihin PD carburetors. These felt seals...
Honda CB550F CB550K CB500K carb float setting tool

1971-77 Honda CB550F / CB550K / CB500K Carb Float Setting Tool

$15.94 USD
73-0888
Set your carb floats with ease using this Carb Float Setting Tool. Use this tool to help set your floats with ease. This pre-set...
Honda CB550F CB550K CB500K carb float 16013-329-004

1971-77 Honda CB550F / CB550K / CB500K Carb Float ~ Replaces 16013-329-004

$28.95 USD
20-6511
Replace your CB500 or CB550 carb float with this Carb Float with Pin, replacing OEM #16013-329-004.4 carb floats are used per bike, order the...
Comparer

1974 Honda CB550K · Floats & Carb Parts Buying guide

Check the float and the hardware separately

A float listing gives a per-bike usage count, while the drain screw explicitly states its sale quantity. Keep these details separate when ordering, and use the screw kit description without assuming an unstated fastener count.

Parts to consider

1971-77 Honda CB550F / CB550K / CB500K Carb Float ~ Replaces 16013-329-004 Carb float with pinFloat replacing OEM 16013-329-004; the listing says four are used per bike.Voir la pièce 1971-77 Honda CB550 / CB500 Carburetor Screw Kit Carburetor screw kitReplacement screw kit listed for CB500K and 1974–76 CB550K carburetors.Voir la pièce 1971-77 Honda CB550F / CB550K / CB500K Carb Float Setting Tool Preset carb float setting gaugePreset gauge listed for the 1974–76 CB550K; no numerical setting is specified.Voir la pièce

Pièces connexes : Individual bowl drain screw

Float usage is not package contents

The float references OEM 16013-329-004, includes its pin and states that four floats are used per motorcycle. That usage figure does not identify a four-float package. Confirm the order quantity independently of the number of carburetors on the bike.

Choose the clearly described drain screw

The linked stock-type drain screw explicitly includes an O-ring and is sold individually. Compare the screw and sealing arrangement with the bowl being repaired. Its single-item quantity makes a specific drain-screw order clearer than assuming the contents of another pack.

Float and carb questions

How many floats does the 1974 CB550K use?

The float description states four floats are used per motorcycle and includes a pin with the float. It references OEM 16013-329-004 for the 1974–76 CB550K; the usage count is separate from package quantity.

Does the linked drain screw include an O-ring?

Yes. The individual stock-type bowl drain screw expressly includes an O-ring and is sold each. It lists the CB550K from 1974 to 1976, so compare it with the bowl and screw being replaced.

Does the preset gauge give a numerical float height?

No numerical float-height value is stated in its description. It is identified as a preset float-setting gauge for the 1974–76 CB550K, so check the carburetor application rather than inventing a setting from the product name.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1974 Honda CB550K

Votre panier

×