Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

Consultation en cours Supports, caoutchoucs et fixations

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 / CB550 / CB500 Speedometer / Tachometer Internal Rubber Seal

$11.95 USD
49-0255
Replace your gauge internal seal with this Speedometer / Tachometer Internal Rubber Seal. Replaces the ripped, dried, or missing rubber internal seal.Key Features• Speedo...
Épuisé
Honda CB chrome speedometer and tachometer cover set

Honda CB Chrome Speedometer & Tachometer Cover Set

$44.95 USD
02-2480
Dress up your gauge cluster with this Chrome Speedometer & Tachometer Cover Set. These chrome-plated covers fit over your stock speedo and tach to...

Honda CB Speedo/Tachometer Meter Cushion ~ Replaces 37235-323-700

$22.26 USD
73-0096
Replace your speedo / tach meter cushion with this Speedo / Tachometer Meter Cushion, replacing OEM #37235-323-700.Note: 2 used per bike, one for the...

Honda CB750 / CB550 / CB500 Speedometer & Tachometer Replacement Glass Lens Set/2

$44.95 USD
49-0250
Replace scratched or broken gauge glass with this Speedometer & Tachometer 92mm Glass Lens Set of 2. If the glass lens of your gauges...

Honda CB Trip Meter Knob Rubber Grommet

$17.50 USD
49-0256
Replace your trip meter knob grommet with this Day Trip Meter Knob Rubber Grommet. These grommets often dry out and rip; get a new...
Nouveau
Honda CB900 CB750 CB650 CB550 Honda tachometer chrome back cover plate 37246-426-000

Honda CB900 / CB750 / CB650 / CB550 Genuine Honda Tachometer Chrome Back Cover Plate ~ OEM 37246-426-000

$69.95 USD
99-5072
Upgrade or restore your classic Honda motorcycle with this Genuine Honda Tachometer Chrome Back Cover Plate — precision‑engineered and quality made in Japan. This...
Nouveau
Honda CB900 CB750 CB650 CB550 Honda speedometer chrome back cover plate 37236-426-000

Honda CB900 / CB750 / CB650 / CB550 Genuine Honda Speedometer Chrome Back Cover Plate ~ OEM 37236-426-000, 37236-393-008

$69.95 USD
99-5253
Upgrade or restore your classic Honda motorcycle with this Genuine Honda Speedometer Chrome Back Cover Plate — precision‑engineered and made in Japan. This authentic...

1971-78 Honda CB550F / CB550K / CB500K Speedometer & Tachometer Crimp Ring Set/2

$64.95 USD
49-0247
Restore your gauge faces with this Speedometer & Tachometer Crimp Ring Set of 2 for NIPPON SEIKI gauges. When changing the speedometer or tachometer...

1977 Honda CB550F · Instrument Repair Parts Buying guide

Match each repair part to the gauge and its position

The glass and crimp-ring sets address instrument closure parts, while the mounting cushion supports the gauge. Genuine chrome lower covers are separate choices for the speedometer and tachometer; compare the existing housings before selecting them.

Check closure parts before starting instrument repair

The glass set contains two slightly curved 92 mm lenses. The crimp-ring set contains two rings for Nippon Seiki gauges, with 103.4 mm inner and 108.2 mm outer diameters. Verify the fitted maker and housing before ordering, and plan for suitable instrument-repair methods rather than assuming these parts make a simple exterior trim swap.

Keep mounting rubbers and chrome lower covers distinct

The meter cushion replaces reference 37235-323-700 at the gauge mount; it is not an internal glass seal. Genuine Honda lower-cover choices are listed separately for the speedometer and tachometer. Compare the existing lower plate and reference before choosing the appropriate cover for a 1977 housing.

Buying questions

Can I use the Nippon Seiki crimp rings on an instrument from another maker?

Do not assume interchange. The set is described for Nippon Seiki gauges and gives 103.4 mm inner and 108.2 mm outer diameters. Check the fitted maker, housing and closure dimensions before ordering, particularly after a gauge replacement.

Is the meter cushion the seal beneath the instrument glass?

No. It is the mounting cushion, reference 37235-323-700, with a position at each instrument. Identify the worn rubber by its location; a mounting cushion and an internal glass seal are different repair parts.

Which genuine lower cover should I choose for the speedometer side?

Choose the speedometer-specific plate and compare the fitted housing with the listing’s shape and references, including 37236-426-000. The separate tachometer plate lists reference 37246-426-000. These lower covers are trim parts behind the gauges, not replacement instrument mechanisms.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité

Votre panier

×