VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1977 Honda CB550F Supersport — Outils pour moteur, direction et embrayage

Select service tools for your 1977 Honda CB550F by the working fitting, rather than a shared model tag. The cap wrench uses a 24 mm hex; the seal driver fits its stated fork sizes. The tripod wrench is for the specified spin-on filter arrangement.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Outils pour moteur, direction et embrayage

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB1100 CB1000 CB900 CB750 oil filter wrench

Honda CB1100/CB1000/CB900/CB750 Oil Filter Wrench

$14.95 USD
35-9022
Remove and install spin-on oil filters with this 3/8" Drive Tripod Oil Filter Wrench. Designed for our aftermarket spin-on cartridge oil filters.Key Features• 3/8"...
Honda CB750 CB650 CB550 CB500 35 36mm fork seal driver

Honda CB750 / CB650 / CB550 / CB500 35/36mm Fork Seal Driver

$49.95 USD
35-4299
Install 35mm or 36mm fork seals cleanly with this 35/36mm Fork Seal Driver. High-quality carbon steel with split design. Use for easy installation of...
Honda CB750 CB550 fork cap wrench 24mm

Honda CB750 / CB550 Fork Cap Wrench ~ 24mm

$7.00 USD
35-9116
Remove 24mm fork caps without damage with this 24mm Non-Marring Fork Cap Wrench. Fits all motorcycles with 24mm fork caps. Lets you remove fork...
Universal motorcycle fork cap wrench 35mm

Universal Motorcycle Fork Cap Wrench ~ 35mm

$7.00 USD
35-9113
Fork Cap Wrench ~ 35MM Size for custom or restoration work on classic Honda CB motorcycles.  Key Features Aftermarket part Sold as: Each Fitment...
Voir les détails
Comparer

1977 Honda CB550F · Fork & Filter Tools Buying guide

Check cap hex, fork size and filter type separately

These tools address different service connections. Measure the fitted cap and identify the fork size, then check whether an aftermarket spin-on cartridge is installed before choosing its wrench instead of equipment for the original housing.

Parts to consider

Honda CB750 / CB550 Fork Cap Wrench ~ 24mm 24 mm non-marring fork-cap wrenchFor a 24 mm fork-cap hex; listed for original CB550F applications.Voir la pièce Honda CB750 / CB650 / CB550 / CB500 35/36mm Fork Seal Driver 35/36 mm split fork-seal driverSplit-design tool for installing seals on the specified fork sizes.Voir la pièce Honda CB1100/CB1000/CB900/CB750 Oil Filter Wrench Three-eighths-drive spin-on filter wrenchTripod wrench for the listed aftermarket spin-on cartridge filter; not a paper-element housing tool.Voir la pièce

Use two separate measurements for fork tools

A 35/36 mm split seal driver and a 24 mm cap wrench do not describe alternative sizes for one fitting. Identify the actual tube size and measure the cap hex independently, especially after fork or cap modifications. Match each tool to the corresponding operation and the service instructions for that assembly.

Choose the cartridge wrench only for its filter system

The three-eighths-drive tripod wrench is intended for the specified aftermarket spin-on filter cartridge. It does not engage the original paper-filter housing bolt. Identify the filter fitted to the engine and check the conversion’s service needs before ordering a tool that assumes a different housing arrangement.

Common buying questions

Does a 35 mm fork tube identify the wrench needed for its cap?

Tube diameter and cap hex are separate measurements. The stock-application wrench is 24 mm, but a changed cap needs its own check. Measure the working hex before choosing the tool rather than using the tube diameter.

How do I choose the driver for a replacement fork?

Identify the replacement fork’s actual diameter and the tool engagement needed for seal installation. Compare those with the stated 35/36 mm conventional or inverted application; the motorcycle’s original model name does not establish conversion fit.

Which oil-filter setup uses the tripod wrench?

It is specified for the aftermarket spin-on cartridge filter and has a three-eighths drive. The original paper-filter housing uses another service connection. Identify the installed arrangement first, then choose its appropriate tool and procedure.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1977 Honda CB550F Supersport

Votre panier

×