Pièces pour motos Honda
Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.
Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.
1985 Honda CB650SC Nighthawk · Custom Speedometers Buying guide
The mini and vintage-style gauges differ in size, mounting information and documented indicator functions. Match the chosen gauge’s calibration to the fitted drive, then compare the complete mounting and wiring requirements.
Mini MPH gauge, black faceChrome/black 2.25-inch custom gauge, 0–140 MPH; stated calibration 60 MPH = 2240 RPM.Voir la pièce
Mini KPH gauge, black faceChrome/black 2.25-inch custom gauge, 0–220 KPH; stated calibration 100 KPH = 2330 RPM.Voir la pièce
Vintage-style MPH gaugeMechanical 85mm speedometer, 0–130 MPH, 2240:60 ratio and 57mm mounting centers.Voir la pièce
Pièces connexes : White-face mini MPH alternative
The black-face MPH mini 03-0725 and linked white-face MPH mini 03-0744 both list 0–140 MPH and 60 MPH = 2240 RPM. KPH mini 03-0724 lists 0–220 KPH and 100 KPH = 2330 RPM. All three are 2.25-inch chrome-body gauges with LED illumination, high-beam, neutral, oil-pressure and turn-signal indicators and a supplied V-plate; the handlebar bracket is separate.
The vintage MPH gauge reads 0–130 MPH with a stated 2240:60 calibration. Its listed dimensions are approximately 85 mm diameter and 55 mm depth, with 57 mm mounting centers and LED illumination. Custom mounting is required; compare the physical layout separately from the drive calibration.
The vintage listing specifies illumination but does not establish the mini gauges’ high-beam, neutral, oil-pressure and turn-signal indicator inventory. Confirm how those functions will be retained before choosing the larger gauge; do not transfer one format’s features to the other.
The listing separately gives 55 mm body depth and describes the rear mounts as 25 mm wide/thick, without defining an overall installed depth. Obtain a dimensioned drawing or confirmation of the rear clearance before finalizing a tight bracket layout; do not assume 55 mm is the complete space requirement.
Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.
Sélectionnez le modèle exact et l’année pour affiner les résultats.
Choisissez votre modèle et l’année.