VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1984 Honda CB650SC Nighthawk — Cadre et carrosserie

Bodywork repairs on a 1984 Honda CB650SC Nighthawk often begin at the small mounting pieces. Match the tank supports, sidecover rubbers and passenger footpeg hardware to the actual worn location, then separate individual rubber quantities from packaged pin sets.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Cadre et carrosserie

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB side stand rubber 50548-356-700

Honda CB Side Stand Rubber ~ Replaces 50548-356-700

$8.74 USD
02-6537
Take the rattle out of your side stand with this Side Stand Rubber Cushion, a direct replacement for OEM #50548-356-700. Fits a broad range...
Honda CB sidecover damper rubber b 83551-300-000

Honda CB Sidecover Damper Rubber B ~ Replaces 83551-300-000

$2.54 USD
02-6531
Keep your sidecovers snug and rattle-free with this Rubber Sidecover Damper B, a direct replacement for OEM #83551-300-000. Fits an exceptionally broad range of...
Honda CB1100 CB1000 gearshift lever rubber 24781-419-000

Honda CB Stock Type Gearshift Lever Rubber ~ Replaces 24781-419-000

$7.50 USD
73-0838
Replace your gearshift lever rubber with this Stock Type Gearshift Lever Rubber, replacing OEM #24781-419-000.Key Features• Stock-type gearshift lever rubber• Replaces OEM #24781-419-000• Honda...
Honda CB1000 CB900 CB750 passenger rear footpeg pin and cotter pin set 95015-83000

Honda CB Passenger Rear Footpeg Pin & Cotter Pin Set

$7.00 USD
73-0945
Replace your passenger rear footpeg pins with this Passenger Rear Footpeg Pin & Cotter Pin Set. Includes 2 footpeg pins and 2 cotter pins....
Honda CB front fuel tank rubber cushion 17611-KE8-000

Front Fuel Tank Rubber Cushion ~ Replaces Honda OEM 17611-KE8-000

$5.50 USD
27-5520
This aftermarket front fuel tank rubber cushion replaces Honda OEM 17611-KE8-000 on the listed Honda CB-series applications. It mounts to the frame and supports...
Nouveau
Honda CB700 CB650 CB550 fuel tank front rubber cushion 17611-KE8-000

Honda CB Genuine Honda 17611-KE8-000 Fuel Tank Front Rubber Cushion ~ Replaces 17611-KE8-000

$17.95 USD
99-5145
This genuine Honda front fuel tank rubber cushion mounts to the frame and supports the front of the gas tank on select classic Honda...
Comparer

1984 Honda CB650SC Nighthawk · Frame & Body Buying guide

Plan the repair around the worn mounting point

This selection covers body supports and small frame-related service pieces. Start with the part’s location, then choose the required quantity and decide whether genuine Honda or aftermarket tank rubber suits your repair.

Parts to consider

Honda CB Sidecover Damper Rubber B ~ Replaces 83551-300-000 Sidecover damper BSold individually; the CB650SC application specifies two per side. Replaces reference 83551-300-000.Voir la pièce Honda CB Genuine Honda 17611-KE8-000 Fuel Tank Front Rubber Cushion ~ Replaces 17611-KE8-000 Genuine Honda front tank cushionGenuine Honda 17611-KE8-000 rubber support for the front of the tank. Sold individually.Voir la pièce Honda CB Passenger Rear Footpeg Pin & Cotter Pin Set Passenger footpeg pin setContains two footpeg pins and two cotter pins. Listed for the 1983–85 CB650SC Nighthawk.Voir la pièce

Pièces connexes : Aftermarket front tank cushion · Gearshift lever rubber · Side stand cushion

Count rubbers by location

The sidecover B damper is sold individually, with two specified on each side of this CB650SC. Front tank cushions are also sold each. Make a location-by-location list of deteriorated or missing rubbers, then compare that count with the individual quantities in your order.

Choose tank rubber by origin and shape

The featured front tank cushion is genuine Honda. The linked aftermarket cushion replaces the same 17611-KE8-000 reference and is also sold individually. Compare the old mount’s shape and tank arrangement, especially on a modified motorcycle; a model match does not establish the fittings on a replacement tank.

Buying questions

How many sidecover dampers should I order?

The B-type damper application calls for two on the right and two on the left. They are sold individually, so order four for both complete sides or count the worn and missing positions for a partial repair.

What is in the passenger footpeg pin set?

Each set contains two footpeg pins and two cotter pins. Compare the passenger peg pivots with reference 95015-83000 and the listed 1983–85 CB650SC application before choosing it for changed peg assemblies.

Can I choose an aftermarket front tank cushion?

Yes. The linked aftermarket cushion replaces 17611-KE8-000, while the featured cushion is genuine Honda. Both are sold individually; compare the mount shape and order two if replacing both front supports.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1984 Honda CB650SC Nighthawk

Votre panier

×