VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1981 Honda CB650C Custom — Outils pour moteur, direction et embrayage

This tool is relevant to a 1981 CB650C only when the specified aftermarket spin-on filter arrangement is installed. Identify the filter before ordering. A tripod wrench for that conversion is a different equipment choice from tools used with the original housing and paper element.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Outils pour moteur, direction et embrayage

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB1100 CB1000 CB900 CB750 oil filter wrench

Honda CB1100/CB1000/CB900/CB750 Oil Filter Wrench

$14.95 USD
35-9022
Remove and install spin-on oil filters with this 3/8" Drive Tripod Oil Filter Wrench. Designed for our aftermarket spin-on cartridge oil filters.Key Features• 3/8"...
Honda CB750 CB650 CB550 CB500 35 36mm fork seal driver

Honda CB750 / CB650 / CB550 / CB500 35/36mm Fork Seal Driver

$49.95 USD
35-4299
Install 35mm or 36mm fork seals cleanly with this 35/36mm Fork Seal Driver. High-quality carbon steel with split design. Use for easy installation of...
Comparer

1981 Honda CB650C Custom · Spin-On Filter Service Tool Buying guide

Check for the matching filter conversion first

The tripod wrench takes a 3/8-inch drive and is specified for the store’s aftermarket spin-on cartridge filter. Confirm that exact arrangement on the motorcycle rather than assuming every CB650C has a spin-on filter.

Parts to consider

Honda CB1100/CB1000/CB900/CB750 Oil Filter Wrench Spin-on oil filter wrenchPart 35-9022: 3/8-inch-drive tripod wrench listed for aftermarket spin-on filter 15-1006 in the CB650 family.Voir la pièce

Use the conversion application narrowly

The matching chrome spin-on product’s written application includes the 1981 CB650C and replaces the original housing, bolt and paper element. That supports a conditional tool choice, not an assumption that the conversion is fitted. Inspect the engine’s actual filter arrangement before buying the wrench.

Do not infer universal filter engagement

The wrench is intended for the specified aftermarket cartridge filter and is mainly useful for controlled removal. Follow the filter or adapter manufacturer’s installation procedure. A spin-on construction alone does not establish that the tool engages every brand or dimension of replacement filter.

Spin-On Filter Service Tool questions

Which filter must be fitted before this wrench is useful?

The CB650-family application for wrench 35-9022 specifies aftermarket spin-on filter 15-1006. It does not service the original center-bolt housing and paper element. Check the filter actually fitted, including its identity after an unknown conversion, before ordering.

Should I use the wrench to tighten the spin-on filter as firmly as possible?

No. Follow the filter or adapter manufacturer’s installation procedure and do not overtighten. The wrench’s product guidance describes it as mainly useful for controlled removal when the filter cannot be loosened by hand, not as a reason to add extra installation force.

Does a different spin-on filter automatically take the same wrench?

No universal fit is established. Verify the replacement filter and its tool requirements separately; the wrench’s 3/8-inch drive specifies the connection to your wrench equipment, not the dimensions of every filter it can engage.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1981 Honda CB650C Custom

Votre panier

×