VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1980 Honda CB650C Custom — Outils pour moteur, direction et embrayage

This engine service tool is relevant to a 1980 Honda CB650C Custom only when the matching aftermarket spin-on oil filter is installed. Identify the filter arrangement first, then choose the tripod wrench for that conversion rather than the original housing.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Outils pour moteur, direction et embrayage

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB1100 CB1000 CB900 CB750 oil filter wrench

Honda CB1100/CB1000/CB900/CB750 Oil Filter Wrench

$14.95 USD
35-9022
Remove and install spin-on oil filters with this 3/8" Drive Tripod Oil Filter Wrench. Designed for our aftermarket spin-on cartridge oil filters.Key Features• 3/8"...
Honda CB750 CB650 CB550 CB500 35 36mm fork seal driver

Honda CB750 / CB650 / CB550 / CB500 35/36mm Fork Seal Driver

$49.95 USD
35-4299
Install 35mm or 36mm fork seals cleanly with this 35/36mm Fork Seal Driver. High-quality carbon steel with split design. Use for easy installation of...
Comparer

1980 Honda CB650C Custom · Engine Service Tool Buying guide

Choose the wrench for the filter actually installed

The tripod wrench is specified for the store’s aftermarket spin-on filter. That conversion is offered for the CB650C, but its availability does not mean your motorcycle has it fitted. Check the current filter before ordering.

Parts to consider

Honda CB1100/CB1000/CB900/CB750 Oil Filter Wrench Spin-on oil filter wrenchPart 35-9022: 3/8-inch-drive tripod wrench listed for aftermarket spin-on filter 15-1006 in the CB650 family.Voir la pièce

Identify the filter arrangement before buying

The matching chrome spin-on filter is an aftermarket conversion that replaces the original housing, filter bolt and paper element. Its application includes the 1980 CB650C. Use this wrench only when that matching spin-on arrangement is installed, not simply because the frame model appears in the category.

Prepare for the specific spin-on service

The tripod wrench uses a 3/8-inch drive and is intended for the specified aftermarket spin-on cartridge filters. Confirm the fitted filter matches that application. Use the wrench for controlled removal when needed, and follow the filter or adapter manufacturer’s fitting instructions.

Buying questions

Which filter must be fitted before this wrench is useful?

The CB650-family application for wrench 35-9022 specifies aftermarket spin-on filter 15-1006. It does not service the original center-bolt housing and paper element. Check the filter actually fitted, including its identity after an unknown conversion, before ordering.

Should I use the wrench to tighten the spin-on filter as firmly as possible?

No. Follow the filter or adapter manufacturer’s installation procedure and do not overtighten. The wrench’s product guidance describes it as mainly useful for controlled removal when the filter cannot be loosened by hand, not as a reason to add extra installation force.

Does a different spin-on filter automatically take the same wrench?

No universal fit is established. Verify the replacement filter and its tool requirements separately; the wrench’s 3/8-inch drive specifies the connection to your wrench equipment, not the dimensions of every filter it can engage.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1980 Honda CB650C Custom

Votre panier

×