VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1980 Honda CB650 — Joints et fixations

Plan the exhaust seal and fastener quantities separately for your 1980 CB650. The available port-gasket choices are one piece or a pack of ten, while the hardware set contains studs and flange nuts. Inspect the old fittings and confirm the port application before purchasing.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Joints et fixations

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB kick stand stopper rubber 95011-61000

Honda CB Kick Stand Stopper Rubber ~ Replaces 95011-61000

$2.95 USD
07-4624
Replace a worn kick stand stopper with this Kick Stand Stopper Rubber "A", a direct replacement for OEM #95011-61000. Exceptionally broad fitment across the...
Honda CB900 CB650 CB550 exhaust headpipe gasket (each) 18212-634-000

Honda CB Exhaust Headpipe Gasket (Each) ~ Replaces 18212-634-000

$3.58 USD
17-2813
Replace one exhaust port gasket on your CB650, CB400, CB450, or modern CB900F with this Exhaust Port Gasket, 1 piece, replacing OEM #18212-634-000 /...
Honda CB650 CB650C exhaust stud set

1979-82 Honda CB650 / CB650C Exhaust Stud Set

$34.95 USD
73-1139
Restore your exhaust system’s performance and reliability with this complete Exhaust Stud Set for your Honda CB650 or CB650C. Designed to meet OEM specs,...
Honda CB900 CB650 CB550 exhaust headpipe gaskets (pk 10) 18212-634-000

Honda CB Exhaust Headpipe Gaskets ~ (Pk/10) ~ Replaces 18212-634-000

$27.95 USD
17-3813
Stock up on exhaust port gaskets for your CB650, CB400, CB450, or modern CB900F with this 10-pack, replacing OEM #18212-634-000 / #18291-236-000 / #18291-MN4-920.Key...
Comparer

1980 Honda CB650 · Exhaust Gaskets & Fasteners Buying guide

Match the sealing reference and the fitted exhaust flange

The port-gasket options share replacement references but differ in package quantity. The stud-and-nut set is a separate purchase; compare its stated inventory and the fitted flange before treating it as the hardware for a changed exhaust.

Parts to consider

Honda CB Exhaust Headpipe Gaskets ~ (Pk/10) ~ Replaces 18212-634-000 Exhaust-port gasket ten-packTen exhaust-port gaskets, supplied as a multi-pack rather than individually.Voir la pièce Honda CB Exhaust Headpipe Gasket (Each) ~ Replaces 18212-634-000 Individual exhaust-port gasketOne exhaust-port gasket; references 18212-634-000, 18291-236-000 and 18291-MN4-920.Voir la pièce 1979-82 Honda CB650 / CB650C Exhaust Stud Set Exhaust stud and nut setEight exhaust studs and eight flange nuts for the CB650 application.Voir la pièce

Use the same reference check for either gasket package

Gasket 17-2813 supplies one piece and pack 17-3813 supplies ten. Both list 18212-634-000, 18291-236-000 and 18291-MN4-920 for exhaust-port sealing. Keep those references with the order rather than choosing a gasket only because its title mentions the exhaust.

Read the stud set as a hardware inventory

Set 73-1139 supplies eight exhaust studs and eight flange nuts. Compare that written inventory with the parts required and confirm additional components separately; it is not a complete exhaust-repair parts list.

Ordering questions

Will the stud set suit an aftermarket exhaust flange?

The stud listing calls for checking spacing and flange thickness on a non-stock exhaust. It gives no stud thread dimensions or length, so obtain those specifications and compare the fitted flange before ordering where the original arrangement has changed.

Can the port-gasket reference confirm a seal for a different pipe joint?

These listings identify exhaust-port gaskets and give replacement references, but no dimensions for comparing an unidentified joint. Obtain the fitted exhaust system’s required gasket specification before selecting a seal for a different location or a changed connection.

Can I reuse a port gasket after removing the headpipe?

Honda’s Common Service Manual calls for a new exhaust-pipe gasket whenever the pipe is removed from the engine. Include a replacement for each opened port connection and use the model-specific manual for assembly and tightening.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1980 Honda CB650

Votre panier

×