VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1995 Honda CB1000 — Freins et embrayage

On the 1995 Honda CB1000 the clutch is hydraulic, and most listings belong to that circuit, from the master cylinder kit and pushrod kit to the slave piston and lever switch. Front brake master parts, lever pivot hardware and clutch plates round out the category.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Freins et embrayage

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Épuisé
Honda CB1100 CB1000 handlebar brake lever pivot bolt and nut set 90114-MA5-671

Honda CB Handlebar Brake Lever Pivot Bolt & Nut Set ~ Replaces 90114-MA5-671

$9.95 USD
73-1031
Replace your brake lever pivot hardware with this Handlebar Brake Lever Pivot Bolt & Nut Set, used to fasten the brake lever in place....
Honda CB750SC CB700SC CB650SC clutch master cylinder kit 22886-MB0-305

Honda Clutch Master Cylinder Rebuild Kit ~ Replaces 22886-MB0-305

$29.95 USD
08-0207
Rebuild your Nighthawk's clutch master cylinder with this Clutch Master Cylinder Rebuild Kit, replacing OEM #22886-MB0-305. Fits the mid-'80s CB750SC and CB700SC Nighthawks, CB1000...
Honda CB750K CB1000 CB650 front master cylinder kit 45530-MA4-671

Honda CB Front Master Cylinder Rebuild Kit ~ Replaces 45530-MA4-671

$29.95 USD
08-0201
Rebuild your later-model CB's front master cylinder with this Front Master Cylinder Rebuild Kit, replacing OEM #45530-MA4-671. Fits the CB750K (1981-82), CB1000, CB900F (2002-07),...
Magura universal front master cylinder assembly 16mm

Magura Universal Front Master Cylinder Assembly ~ 16mm

$259.00 USD
08-0251
Step up to dual-disk compatibility with this Magura Universal Front Brake Master Cylinder, featuring a 16mm piston diameter recommended for dual-disk brake systems. Threaded...
Nouveau
Honda CB1000 clutch slave cylinder piston 22863-MJ8-003

1994-95 Honda CB1000 Clutch Slave Cylinder Piston ~ Replaces 22863-MJ8-003

$28.22 USD
29-0078
Restore smooth clutch operation with this Clutch Slave Cylinder Piston, designed as a direct replacement for worn or damaged original components. This piston replaces...
Honda CB1000 CB650 CB550 CB77 CB72 steel clutch plate 22321-MT3-000

Honda CB Steel Clutch Plate ~ Replaces 22321-MT3-000

$10.95 USD
39-1241
Replace your CB1000, CB650SC, CB550, or CB72/CB77 steel clutch plate with this Steel Clutch Drive Plate, replacing OEM #22321-MT3-000.Order the number of pieces required...
Honda CB1000 CB500 CB450 CL450K0 clutch friction plate 22201-MA7-000

Honda CB Clutch Friction Plate ~ Replaces 22201-MA7-000

$8.95 USD
39-1046
Replace your clutch friction plates with this Clutch Friction Plate, replacing OEM #22201-MA7-000 / #22201-283-000.Order the number of pieces required for your model.Key Features•...
Nouveau
Honda CB1000 CB700 CB650 CB550 clutch lever switch 35330-MB0-003

Honda CB1000 / CB700 / CB650 / CB550 Clutch Lever Switch ~ Replaces 35330-MB0-003

$16.38 USD
29-0085
Replace your clutch lever switch with this Clutch Lever Switch, replacing OEM #35330-MB0-003.Key Features• Clutch lever switch• Replaces OEM #35330-MB0-003• Honda part name: Switch...
Honda CB750SC CB700SC CB650SC clutch master cylinder pushrod kit 22884-MB0-006

Honda Nighthawk Clutch Master Cylinder Pushrod Kit

$13.95 USD
08-0301
Rebuild your Nighthawk's clutch master cylinder pushrod with this Clutch Master Cylinder Pushrod Kit. Includes the pushrod (OEM #22884-MB0-006) and bushing (OEM #22885-MB0-006), two...
Comparer

1995 Honda CB1000 · Brake & Clutch Buying guide

Fluid at both levers

Both bar levers push fluid instead of pulling cables. Rubber seals in each master cylinder harden with age, so a lever that sinks or feels vague on either side is a rebuild signal.

Clutch and brake picks

Honda Clutch Master Cylinder Rebuild Kit ~ Replaces 22886-MB0-305 Clutch master cylinder kitSeals and piston for the clutch master, with fitment covering the CB1000 of 1994-95 plus various Nighthawk models.Voir la pièce 1994-95 Honda CB1000 Clutch Slave Cylinder Piston ~ Replaces 22863-MJ8-003 Clutch slave cylinder pistonA direct-replacement piston whose title names the 1994-95 CB1000.Voir la pièce Honda CB Front Master Cylinder Rebuild Kit ~ Replaces 45530-MA4-671 Front brake master cylinder kitRenews the bar-mounted brake master on this and other later CB models.Voir la pièce

Pièces connexes : Clutch pushrod and bushing kit · Clutch friction plate · Clutch lever switch

Treat the clutch as one circuit

Drag, a creeping engagement point or weeping fluid can start at either end of the line. Since every piece from the lever-end master kit to the engine-end slave piston is available, it makes sense to renew the whole path together and bleed once.

When the clutch slips

A hydraulic clutch adjusts itself as plates wear, so slipping under hard acceleration usually points to the plates, not the hydraulics. Steel plates, eight per bike, can be ordered here along with a single friction plate. Refill and bleed with the fluid grade shown on the reservoir cap.

Brake and clutch questions

Does this bike have a clutch cable?

No. The clutch on this model is hydraulic, and the clutch rebuild parts here all carry CB1000 fitment for both model years, so there is no cable to adjust or replace.

Can I rebuild the front calipers from here?

Not yet. Caliper seals, pistons and brake pads are not published for the 1995 CB1000, leaving the front master rebuild kit as the sole brake hydraulics item.

Why is the Magura master cylinder left out?

Magura makes this 16mm master as a universal part without any CB1000 fitment line. Its banjo bolt, washers and brake switch are sold separately too, so this guide leaves it out.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1995 Honda CB1000

Votre panier

×