Pièces pour motos Honda
Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.
Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.
1982 Honda CB750SC · Levers & Clutch Cable Buying guide
The black clutch lever specifies a 10mm mounting hole. The brake lever is tied to its original-type master cylinder application, while the clutch cable must match the end fittings and routing on the motorcycle.
Clutch cableReplaces references 22870-425-010 and 22870-ME1-670 for the cable-operated early Nighthawk clutch.Voir la pièce
Black clutch leverEarly Nighthawk clutch lever with a 10mm mounting hole; reference 53178-MA6-000.Voir la pièce
Black brake leverBrake lever for the specified original-type master cylinder; references 53175-MA5-671 and 53175-MA6-016.Voir la pièce
The featured lever is the early Nighthawk black type with a 10mm bolt hole. Compare the pivot and cable attachment with the fitted perch. A similar-looking Honda lever can have different mounting details, especially on motorcycles assembled from mixed control parts.
The featured cable replaces the specified early CB750SC references. Inspect both end fittings and the route before ordering. If handlebars or risers have changed, confirm suitable reach through the steering movement instead of assuming the original route and cable remain appropriate.
The featured black clutch lever has a 10mm mounting hole. Check the existing pivot and perch before ordering, particularly if the controls were replaced during an earlier restoration or custom build.
The featured brake lever is for its specified original-type application. The complete aftermarket master cylinder has a separately listed dedicated lever, so identify the body before choosing replacement controls.
The original model application does not establish fit after a handlebar change. Compare route, end fittings and required reach with the fitted controls before ordering; avoid a cable that becomes tight during steering.
Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.
Sélectionnez le modèle exact et l’année pour affiner les résultats.
Choisissez votre modèle et l’année.