VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1980 Honda CB750K — Poignées

Replacing the grips on your 1980 Honda CB750K starts with the length and end arrangement, rather than the product photograph alone. The available black rubber options are listed at 130 mm for 7/8-inch bars. The open-end design includes separate plugs; the other design has closed ends.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Poignées

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB type closed-end grips 53165-390-780

Honda OEM Type Closed-End Grips ~ Replaces 53165-390-780

$16.95 USD
02-2422
Keep your classic Honda looking factory-correct with these Honda OEM-Type Rubber Grips. Faithful replicas of the original grips fitted at the factory, in black...
Honda CB type open-end grips 53165-390-780

Honda OEM Type Open-End Grips ~ Replaces 53165-390-780

$19.95 USD
02-2481
Get factory-correct grip fit with the option to finish the bars your way, these Honda OEM-Type Rubber Grips are open-end replicas of the original...
Comparer

1980 Honda CB750K · Grips Buying guide

Compare the grip length and end arrangement

These Honda-type grips are listed for the DOHC CB750K years that include 1980. Compare the 130 mm specification with your present controls, then decide between closed rubber ends and separate plugs.

Parts to consider

Honda OEM Type Closed-End Grips ~ Replaces 53165-390-780 Black closed-end Honda-type gripsListed 130 mm length and 7/8-inch bar application. References 53165-390-780 and 53166-390-780; check the closed ends in the photograph.Voir la pièce Honda OEM Type Open-End Grips ~ Replaces 53165-390-780 Black open-end grips and end plugsOpen rubber ends with separate plugs included in the listing. The stated length and handlebar application match the closed-end option.Voir la pièce

Use the stated size as a check

The listings give the same 130 mm length and 7/8-inch bar application. Check those details against the controls already installed on your motorcycle. If a previous owner changed the bar or controls, the model year alone does not establish that the available grip area matches.

End plugs do not establish accessory fitment

The open-end option supplies its own plugs, and the real product photo shows those separate pieces. That is useful when comparing how the grip ends will look. The listing does not establish fitment for a particular bar-end accessory, so compare any such equipment separately before choosing.

Common questions

What is the stated grip length?

Both current grip listings state a 130 mm length and a 7/8-inch handlebar application. Check the available length on your installed controls before ordering. Do not assume a different length from an earlier CB750 grip listing applies to these products.

How are the two end designs different?

The closed-end product is described as black rubber grips with closed ends. The open-end product has open rubber ends and includes separate end plugs. The supplied photographs show that difference, which is the main choice between these two listings.

Will the open-end grips accept my bar-end accessories?

The listing establishes an open-end design and supplied end plugs, but it does not specify compatibility with your particular mirror, weight or other bar-end accessory. Compare that equipment and your controls directly before choosing the grip arrangement.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1980 Honda CB750K

Votre panier

×