VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1980 Honda CB750K — Réservoirs, bouchons, robinets et pièces

The current tank-related choices for the 1980 CB750K focus on the petcock, front and rear support rubbers, cap seal and emblem screws. A sound tank may need only one of these pieces. Compare the fitting or mounting point involved before replacing unrelated tank hardware.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Réservoirs, bouchons, robinets et pièces

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB650 fuel petcock 16950-425-025

1979-80 Honda CB750 / CB650 Fuel Petcock ~ Replaces 16950-425-025

$44.95 USD
20-8040
Replace your 1979-80 DOHC CB fuel petcock with this Fuel Petcock, replacing OEM #16950-425-025 with M16 x 1.5 threads. Please verify the thread size...
Honda CB750 CB650 rear fuel tank holder rubber 17613-425-000

Honda CB750 / CB650 Rear Fuel Tank Holder Rubber ~ Replaces 17613-425-000

$15.94 USD
02-6552
Secure the back end of your fuel tank with this Rear Fuel Tank Holder Rubber, a direct replacement for OEM #17613-425-000. One used per...
Honda CB750 CB650 CB400 gas cap rubber seal 17632-422-000

Honda CB750 / CB650 / CB400 Gas Cap Rubber Seal ~ Replaces 17632-422-000

$7.95 USD
20-0096
Replace your DOHC Honda gas cap rubber seal with this Gas Cap Rubber Seal, replacing OEM #17632-422-000.Key Features• Gas cap rubber seal• Replaces OEM...
Honda CB front fuel tank holder rubber 17611-425-000

Honda CB Front Fuel Tank Holder Rubber ~ Replaces 17611-425-000

$7.87 USD
02-6551
Keep your fuel tank snugly mounted at the front with this Front Fuel Tank Holder Rubber, a direct replacement for OEM #17611-425-000. Fits the...
Honda CB750 CB650 fuel tank emblem screw set

Honda CB750 / CB650 Fuel Tank Emblem Screw Set

$4.95 USD
01-0121
Complete your fuel tank emblem installation with this Fuel Tank Emblem Screw Set of 4, a direct replacement for OEM #93700-04006-0G. Enough hardware for...
Comparer

1980 Honda CB750K · Gas Tanks, Caps, Petcocks & Parts Buying guide

Identify the tank fitting or support that needs attention

The petcock requires a thread comparison, while the front and rear support rubbers have different references and quantities. The cap seal and emblem screws are separate repair items, with no complete tank or cap assembly featured here.

Parts to consider

1979-80 Honda CB750 / CB650 Fuel Petcock ~ Replaces 16950-425-025 M16 × 1.5 fuel petcockPetcock replacing reference 16950-425-025 for the listed 1979–80 CB750K application. Confirm the thread on your tank.Voir la pièce Honda CB Front Fuel Tank Holder Rubber ~ Replaces 17611-425-000 Individual front tank support rubberReference 17611-425-000. Sold individually; the description states two front support rubbers are used per bike.Voir la pièce Honda CB750 / CB650 Rear Fuel Tank Holder Rubber ~ Replaces 17613-425-000 Rear tank support rubberReference 17613-425-000, with one stated as used per bike. Compare the rear mounting piece on your motorcycle.Voir la pièce

Pièces connexes : Fuel cap rubber seal · Four-piece tank emblem screw set

Thread size is a selection check for the petcock

The tap description gives M16 × 1.5 and reference 16950-425-025, and specifically asks you to verify the thread before ordering. Compare the tank fitted to your motorcycle. An aftermarket or substituted tank can change that connection even though the model selection remains the 1980 CB750K.

The front supports, rear support and cap seal are separate

The front rubber is sold individually with two stated as used per bike. The rear rubber has a different reference and a stated per-bike quantity of one. The cap product is a rubber seal rather than a whole cap; compare the old part before choosing the repair item.

Common questions

Is the front tank rubber sold as a pair?

The description says sold individually and states two used per bike. Compare the two front support positions and order the replacements required. The rear support rubber is a different product with its own reference.

Is the cap-seal product a complete replacement cap?

The product is described as a gas cap rubber seal, replacing reference 17632-422-000. It does not list a complete cap assembly. Compare the seal and fitted cap before ordering for that specific repair.

What comes in the tank emblem hardware set?

The listing supplies four screws and says that quantity is enough for both tank emblems. It gives reference 93700-04006-0G. Compare the emblem mounting on your tank; emblems are not named among the hardware contents.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1980 Honda CB750K

Votre panier

×