VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1979 Honda CB750K — Pièces de bras oscillant

The 1979 Honda CB750K swingarm selection includes bronze pivot bushing options, separate pivot-end caps and a rear shock mounting bushing. Identify the location of the piece being replaced before choosing. Products sharing the swingarm name can serve different parts of the assembly.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Pièces de bras oscillant

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB650 CB550 swingarm dust seal cap (set 2) 52144-362-000

Honda CB Swingarm Dust Seal Cap (Set/2) ~ Replaces 52144-362-000

$16.95 USD
73-1028
Replace your swingarm dust seal caps with this Swingarm Dust Seal Cap Set of 2. These caps go on the ends of the swingarm...
Nouveau
Honda CB750 CB550 CB500 rear shock swingarm bushing 40548-268-000

Honda CB Rear Shock Swingarm Bushing ~ Replaces 40548-268-000

$6.20 USD
28-6918
Rear shock swingarm bushing designed to replace the original Honda component, matching OEM reference 40548-268-000. Fits between the shock and swingarm to provide proper...
Épuisé
Honda CB750 CB650 performance kibblewhite bronze swingarm bushing set 52108-457-300

Honda CB High Performance Kibblewhite Bronze Swingarm Bushing Set ~ Replaces 52108-457-300

$69.95 USD
28-1038
Upgrade your swingarm bushings with this Kibblewhite High Performance Bronze Swingarm Bushing Set of 2, replacing OEM #52108-457-300 / #52108-422-300. Made in the USA...
Honda CB750F CB750K swing arm needle bearing conversion kit

1979 Honda CB750F / CB750K Swing Arm Needle Bearing Conversion Kit

$134.95 USD
28-1031
Upgrade your 1979 DOHC CB750 swingarm with this Swing Arm Needle Bearing Conversion Kit, including needle bearings and a hardened swingarm shaft. Made in...
Honda CB900 CB750 CB650 CB550 front fork oil lock piece 51432-371-003

Honda CB900 / CB750 / CB650 / CB550 Front Fork Oil Lock Piece ~ Genuine Honda 51432-371-003

$29.95 USD
99-5318
This genuine Honda front fork oil lock piece fits inside the front fork assembly on the Honda CB models listed below. It works with...
Comparer

1979 Honda CB750K · Swing Arm Parts Buying guide

Distinguish pivot parts from shock mounting pieces

Bronze bushing pairs, pivot-end cap sets and a rear shock mounting bushing are separately described products. Compare the removed piece and its location, then read the reference and contents on the relevant listing.

Parts to consider

Honda CB High Performance Kibblewhite Bronze Swingarm Bushing Set ~ Replaces 52108-457-300 Kibblewhite Bronze Bushing SetTwo bronze bushings replacing references 52108-457-300 and 52108-422-300; compare the fitted pivot.Voir la pièce Honda CB Swingarm Dust Seal Cap (Set/2) ~ Replaces 52144-362-000 Swingarm Dust Seal Cap SetTwo pivot-end caps replacing reference 52144-362-000; supplied as a separate cap set.Voir la pièce Honda CB Rear Shock Swingarm Bushing ~ Replaces 40548-268-000 Rear Shock Mounting BushingSeparate bushing described as fitting between the shock and swingarm; replaces reference 40548-268-000.Voir la pièce

Choose the bushing by its position

The bronze listings describe pairs of swingarm pivot bushings, while the separate rear shock bushing is described at the shock-to-swingarm mounting point. Compare the removed component and reference before ordering. Their shared swingarm wording does not establish that the mounting bushing can replace a pivot bushing.

Confirm the location of other tagged swingarm pieces

The pivot-end dust caps have their own two-piece listing and reference. A rear shock swingarm bushing is another separately described mounting piece. Compare the removed part and its location carefully so shared swingarm wording does not lead you to choose shock mounting hardware for pivot bushing service.

Common questions

Is the rear shock bushing a pivot bushing set?

Its description identifies a separate bushing between the shock and swingarm, with reference 40548-268-000. The bronze pivot bushing products are different listings supplied as pairs. Compare the part location and reference rather than treating these purchases as interchangeable.

Does a bronze bushing set supply the pivot-end caps?

The bronze listings describe their two-piece bushing sets. The dust seal caps are offered separately as a set of two with reference 52144-362-000. Review those contents rather than assuming the cap set accompanies either bronze bushing option.

Are the Kibblewhite and gunmetal bronze options described as the same product?

They have separate listings. The Kibblewhite pair carries references 52108-457-300 and 52108-422-300, while the other listing describes a gunmetal bronze pair. Compare the descriptions and fitted arrangement; the guide does not assert identical construction or performance.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1979 Honda CB750K

Votre panier

×