Pièces pour motos Honda
Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.
Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.
1982 Honda CB750F · Starter & Charging Buying guide
Use the component identified during diagnosis to narrow this selection. The alternator brush pair, rectifier/regulator and starter-clutch kit each serve a different part of the 1982 CB750F’s charging and starting equipment.
Stock-type rectifier/regulatorEight wires in two housings: four-prong/three-wire and six-prong/five-wire connections.Voir la pièce
Alternator brush pairSet of two 18 × 5 × 4.5 mm brushes with clip mounts for the electromagnetic rotor.Voir la pièce
Starter-clutch roller kitContains three rollers, three caps and three springs for starter-clutch service.Voir la pièce
Pièces connexes : Complete replacement starter · Starter-motor cover gasket · Lithium-only regulator
The alternator brush set uses clip mounts and replaces Honda references 31124-MG5-000, 31124-422-005 and 31125-422-000. The separate Mitsuba starter brush set 24-2021 uses 12 × 14 × 6 mm brushes, with one insulated and one non-insulated lead. Confirm the fitted starter is the two-brush design before ordering that set.
The starter-motor cover gasket is listed for the 1982 CB750F and replaces Honda reference 31282-425-300. Compare the fitted starter cover with that application before ordering, particularly if the assembly has been changed.
Compare your battery maker’s permitted charging voltage with the regulator’s 14.0 V ±0.2 V set point before installation. A lithium battery label alone is not enough to confirm that match. This regulator is not for conventional lead-acid batteries.
For the replacement starter-solenoid relay 73-0824, which replaces Honda 35850-MB0-007, choose pigtail 11-2098. Verify every wire position against the motorcycle’s wiring diagram and the relay terminals before connecting it. Matching wire colors alone does not confirm the correct orientation.
Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.
Sélectionnez le modèle exact et l’année pour affiner les résultats.
Choisissez votre modèle et l’année.