VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1979 Honda CB750F — Jantes, rayons, joints de roue et valves

Wheel service on the 1979 CB750F starts with the fitted hub and the position being repaired. Compare front wheel bearings, front and rear seal kits, retainers and rear cush-drive rubbers rather than assuming similar-looking wheel parts are interchangeable.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Jantes, rayons, joints de roue et valves

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Nouveau
Honda CB900 CB750 CB650 front wheel bearing retainer 44643-300-000

Honda CB Front Wheel Bearing Retainer ~ Replaces 44643-300-000

$16.95 USD
28-4016
Replace your front wheel bearing retainer with this Front Wheel Bearing Retainer, replacing OEM #44643-300-000. Exceptionally broad fitment across the SOHC and DOHC CB750...
Honda CB1100 CB1000 CB900 CB750 CB650 6302-2RS front wheel bearing

Honda CB 6302-2RS Front Wheel Bearing

$14.95 USD
28-6302
Replace your front wheel bearing with this 6302-2RS Front Wheel Bearing with 2 synthetic shields. High quality, made in Japan.2 used per front, order...
Nouveau
Honda CB1100 CB900 CB750 CB650 6304-2RS rear wheel bearing

Honda CB1100 / CB900 / CB750 / CB650 6304-2RS Rear Wheel Bearing

$21.95 USD
28-6304
Keep your rear wheel spinning smoothly with this Rear Wheel Bearing (6304-2RS), designed as a high-quality replacement for worn or aging factory bearings. Manufactured...
Nouveau
Honda CB900 CB750 CB400 rear wheel bearing removal tool 41231-286-000

Honda CB Rear Wheel Bearing Removal Tool ~ Removes retainer OEM 41231-286-000 / 41231-429-000

$21.95 USD
35-9129
Remove stubborn rear wheel bearing retainers safely with this Rear Wheel Bearing Removal Tool, designed specifically for Honda locking rings. This tool is built...
Honda CB1100 CB900 CB750 6305-2RS rear wheel bearing 96140-63050-10

Honda CB 6305-2RS Rear Wheel Bearing ~ Replaces 96140-63050-10

$21.95 USD
28-6305
Replace your rear wheel bearing with this 6305-2RS Rear Wheel Bearing with 2 synthetic shields, replacing OEM #96140-63050-10. High quality, made in Japan.Key Features•...
Honda CB900 CB750 CB650 front wheel seal kit

Honda CB900 / CB750 / CB650 Front Wheel Seal Kit

$7.95 USD
27-9018
Replace your DOHC CB front wheel seals with this Front Wheel Seal Kit of 2 pieces. Made in Japan by OEM supplier.Key Features• Front...
Honda CB900F CB750F rear wheel seal kit

1976-82 Honda CB900F / CB750F Rear Wheel Seal Kit

$11.69 USD
27-9041
Replace your CB750F or CB900F Supersport rear wheel seals with this Rear Wheel Seal Kit of 2 pieces. Made in Japan by OEM supplier.Key...
Nouveau
Honda CB900 CB750 CB400 rear wheel bearing retainer 41231-286-000

Honda CB Rear Wheel Bearing Retainer ~ Replaces 41231-286-000

$31.95 USD
73-1068
Secure your rear wheel bearing properly with this Rear Wheel Bearing Retainer – Brake Disc Side, designed as a direct replacement for the original...
Honda CB750 CB900 CB1100F rear wheel damper 41241-422-000

Rear Wheel Damper / Cush Drive Rubber ~ Genuine Honda 41241-422-000

$27.95 USD
99-5056
This genuine Honda rear wheel damper / cush drive rubber is Honda OEM 41241-422-000 for Honda CB rear wheel applications. It fits inside the...
Honda CB750F CB750K steering bearing kit

1979 Honda CB750F / CB750K Steering Bearing Kit

$64.95 USD
28-2013
Upgrade your 1979 DOHC CB750 steering bearings with this Steering Bearing Kit. Tapered roller steering bearing conversion kit, superior to OEM quality with 10X...
Comparer

1979 Honda CB750F · Wheel Bearings, Seals & Dampers Wheel-parts buying guide

Match the bearing, seal or retainer to the fitted hub

Identify the wheel and the component position before choosing replacement parts. Bearing codes, seal-kit applications and retainer references answer different ordering questions, especially if the motorcycle has replacement wheels or hubs.

Parts to consider

Honda CB 6302-2RS Front Wheel Bearing Front bearing · 6302-2RSJapanese-made bearing 28-6302, sold individually.Voir la pièce Honda CB900 / CB750 / CB650 Front Wheel Seal Kit Front wheel seal kit · 27-9018Front-position seal kit with a listed 1979–82 CB750F application.Voir la pièce 1976-82 Honda CB900F / CB750F Rear Wheel Seal Kit Rear wheel seal kit · 27-9041Separate rear-position seal kit listed for the 1979–82 CB750F.Voir la pièce

Pièces connexes : Genuine Honda cush damper · 41241-422-000 · Brake-disc-side rear bearing retainer · Rear bearing-retainer tool

Select the seal kit by wheel position

Front kit 27-9018 and rear kit 27-9041 each contain two seals made in Japan by an OEM supplier. The matching package count does not make them the same kit. Choose the named wheel position and compare the fitted hub if its original application has changed.

Plan cush-drive replacements from the fitted assembly

Genuine Honda damper 41241-422-000 is sold individually for the rear hub and sprocket-carrier area. Establish the required quantity from the fitted assembly and its model-specific parts diagram rather than treating one product listing as a complete damper set.

Wheel-parts buying questions

How do I choose between the 6304-2RS and 6305-2RS rear bearings?

Both listings include the 1979 CB750F, but they identify different bearing codes. The 6304-2RS listing specifies 20mm inside diameter, 52mm outside diameter and 15mm width; the 6305-2RS listing references Honda 96140-63050-10. Match the bearing marking and exact hub position rather than choosing from the shared model application alone.

Which tool matches the listed rear bearing retainer?

The retainer replaces Honda 41231-286-000 and links to the rear bearing-retainer tool. That tool explicitly names this reference and offers a 22mm hex or 3/8-inch square drive. Compare the fitted retainer reference and the driver already in your workshop before adding the tool.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1979 Honda CB750F

Votre panier

×