VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1982 Honda CB750C — Outils pour moteur, direction et embrayage

Plan the engine-tool order for the components actually fitted to a 1982 CB750C. The rotor puller, dual-size clutch tool and tripod filter wrench have different interfaces. A spin-on conversion or replacement rotor must be identified before selecting equipment from the original motorcycle application.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Outils pour moteur, direction et embrayage

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB1100 CB1000 CB900 CB750 CB450 alternator rotor puller

Honda CB Alternator Rotor Puller

$12.95 USD
35-0035
Pull your DOHC CB alternator rotor with this Alternator Rotor Puller, 18mm x M1.5 right-hand thread, for internal-thread rotors and flywheels.Key Features• Alternator rotor...
Honda CB1100 CB1000 CB900 CB750 CB450 clutch center nut removal tool

Honda CB Clutch Center Nut Removal Tool

$15.10 USD
35-0051
Remove your clutch center nut without damage with this Clutch Center Nut Removal Tool, the perfect tool for easier removal and fitting without damaging...
Honda CB1100 CB1000 CB900 CB750 clutch center nut removal tool premium

Honda CB Clutch Center Nut Removal Tool ~ Premium

$26.95 USD
35-0076
Remove clutch center nuts on different bikes with this Premium Clutch Center Nut Removal Tool, the perfect tool for easier removal and fitting without...
Honda CB1100 CB1000 CB900 CB750 oil filter wrench

Honda CB1100/CB1000/CB900/CB750 Oil Filter Wrench

$14.95 USD
35-9022
Remove and install spin-on oil filters with this 3/8" Drive Tripod Oil Filter Wrench. Designed for our aftermarket spin-on cartridge oil filters.Key Features• 3/8"...
Honda CB750 CB650 CB550 CB500 35 36mm fork seal driver

Honda CB750 / CB650 / CB550 / CB500 35/36mm Fork Seal Driver

$49.95 USD
35-4299
Install 35mm or 36mm fork seals cleanly with this 35/36mm Fork Seal Driver. High-quality carbon steel with split design. Use for easy installation of...
Comparer

1982 Honda CB750C · Engine & Filter Tools Buying guide

Check threads, nut engagement and filter type

The rotor puller has an 18mm × 1.5 right-hand thread. The premium clutch tool has 20mm and 24mm ends. The tripod wrench is for aftermarket spin-on filters and uses a 3/8-inch driver.

Parts to consider

Honda CB Alternator Rotor Puller Rotor puller18mm × 1.5 right-hand threaded puller for the listed internal-thread rotor application.Voir la pièce Honda CB Clutch Center Nut Removal Tool ~ Premium Dual-size clutch nut tool20mm and 24mm ends, used with a 1/2-inch drive extension.Voir la pièce Honda CB1100/CB1000/CB900/CB750 Oil Filter Wrench Tripod spin-on filter wrench3/8-inch-drive tripod wrench for the aftermarket spin-on filter arrangement.Voir la pièce

Choose the tool end for the retained component

The rotor puller’s 18mm × 1.5 right-hand thread must match the rotor. The premium clutch tool offers 20mm and 24mm ends and requires a 1/2-inch drive extension. Compare the actual parts and review the service procedure before applying force.

Select filter equipment for the conversion

The tripod wrench uses a 3/8-inch drive and is intended for aftermarket spin-on cartridges. The original paper element sits inside a different housing arrangement. Identify the filtration system retained on the motorcycle before choosing workshop equipment for its oil service.

Engine & Filter Tools questions

Which driver does the premium clutch tool use?

A 1/2-inch drive extension. Choose between its 20mm and 24mm working ends by matching the actual nut and following the service procedure for the assembly.

Is the tripod wrench intended for the original paper element?

It is specified for aftermarket spin-on filters. Identify the actual filter system first and choose the tool required for that retained housing or conversion.

Can I use the puller with an aftermarket rotor?

Compare that rotor’s internal thread with the 18mm × 1.5 right-hand tool. Identify the replacement component and use its applicable removal guidance before selecting or using the puller.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1982 Honda CB750C

Votre panier

×