VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1976 Honda CB200TK0 — Suspension et roues

Fork sealing, swingarm protection and hub service call for different checks on a 1976 CB200T. The selection includes a specifically listed 1976 fork seal set as well as separate caps, wheel parts and shock mounting nuts, so identify the fitted assemblies first.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Suspension et roues

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB1100 CB900 CB750 type shock absorber nut 90309-315-000

Honda CB OEM Type Shock Absorber Nut ~ Replaces 90309-315-000

$3.95 USD
49-0779
Replace your shock absorber nuts with this Shock Absorber Nut, a replica of the OEM type used when installing shocks. Replaces OEM #90309-315-000.Note: 2...
Nouveau
Honda CB900 CB750 CB650 front wheel bearing retainer 44643-300-000

Honda CB Front Wheel Bearing Retainer ~ Replaces 44643-300-000

$16.95 USD
28-4016
Replace your front wheel bearing retainer with this Front Wheel Bearing Retainer, replacing OEM #44643-300-000. Exceptionally broad fitment across the SOHC and DOHC CB750...
Honda CB750 CB550 CB500 CB450 CB400 reflector 33741-340-670

Honda CB Stock Type Reflector ~ Replaces 33741-340-670

$21.46 USD
11-2303
Restore your mid-'70s Honda's stock reflectors with this Stock-Type Screw-On Reflector with a 6mm thread, replacing OEM #33741-340-670. Broad fitment covering the 1972-78 CB750...
Universal chrome shrouded 290mm shock absorber set side detail

Universal Motorcycle Shorty Shock Absorber Set ~ Chrome Shrouded 290mm

$119.95 USD
06-3591
Drop the back end with a clean all-chrome look using this Custom Shorty Shock Absorber Set. Chrome body and shroud with chrome progressive-wound springs,...
Universal black shrouded 290mm shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black Shrouded 290mm

$129.95 USD
06-3590
Get the shortened look with a bit more coverage using this Custom Shorty Shock Absorber Set featuring a black body and shroud with black...
Épuisé
Universal black 290mm eye-to-eye shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black Eye-to-Eye 290mm

$139.95 USD
06-3592
Go shorter with a different mounting configuration using this Custom Shorty Shock Absorber Set. Black body and shroud with black progressive-wound springs, 290mm (11...
Honda CB400 CB360 CB200 CB175 fork tube cap bolt with o-ring 94605-27101

Honda CB400 / CB360 / CB200 / CB175 Fork Tube Cap Bolt with O-Ring ~ Replaces Honda OEM 9461

$17.95 USD
29-6014
This aftermarket fork tube cap bolt with matching O-ring replaces Honda OEM #94605-27101 on compatible Honda CB front forks. It threads into the top...
Honda CB450 CB400 CB350 CB200 swingarm dust seal cap 52144-356-005

Honda CB Swingarm Dust Seal Cap ~ Genuine Honda 52144-356-005 ~ Replaces 52144-356-005

$24.95 USD
99-5170
This genuine Honda swingarm dust seal cap fits at the swingarm pivot / rear fork area on select Honda CB models. It helps cover...
Nouveau
Honda CB200 CB175 rear wheel damper bushing set 4 41241-307-010

1971-76 Honda CB200 / CB175 Rear Wheel Damper Bushing Set/4 ~ Replaces Honda OEM 41241-307-010

$14.95 USD
28-6917
This aftermarket rear wheel damper bushing set replaces Honda OEM #41241-307-010 for select vintage Honda CB models. These rubber damper bushings fit into the...
Honda CB200TK CB175K fork seals

1969-76 Honda CB200TK / CB175K Fork Seals

$18.76 USD
27-1001
Replace your CB175 or CB200T fork seals with this Fork Seal Set, 31 x 43 x 10mm. Made in Japan by OEM supplier.Key Features•...
Épuisé
Universal black 290mm shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black 290mm

$139.95 USD
06-3589
Slam the back end with this Custom Shorty Shock Absorber Set, measuring 290mm (11 3/8") eye-to-clevis, noticeably shorter than stock for custom café, bobber,...
Comparer

1976 Honda CB200T · Suspension & Wheel Parts Buying guide

Identify the forks and hubs before choosing service parts

The fork cap has a defined thread and included O-ring. The swingarm cap is an individual genuine Honda part. Linked fork seals and rear-wheel dampers require their own dimension and quantity checks.

Parts to consider

Honda CB400 / CB360 / CB200 / CB175 Fork Tube Cap Bolt with O-Ring ~ Replaces Honda OEM 9461 Fork cap bolt with O-ringAftermarket cap with matching O-ring, 27 mm × 1.0 mm thread and 17 mm hex. Sold individually.Voir la pièce Honda CB Swingarm Dust Seal Cap ~ Genuine Honda 52144-356-005 ~ Replaces 52144-356-005 Genuine Honda swingarm dust capGenuine Honda reference 52144-356-005, sold individually for the swingarm pivot area.Voir la pièce Honda CB OEM Type Shock Absorber Nut ~ Replaces 90309-315-000 Stock-type shock mounting nutOEM-type replica nut for reference 90309-315-000; two nuts specified per motorcycle.Voir la pièce

Pièces connexes : Fork seal set · Rear-wheel damper bushings · Front-wheel bearing retainer

Check the new seal and cap order separately

The Japanese-made fork seal set explicitly covers CB200T 1976 and specifies 31 × 43 × 10 mm. The cap is an aftermarket replacement with a 27 mm × 1.0 mm thread, supplied with an O-ring. These dimensions describe the offered parts; compare them with the fitted forks.

Identify wheel and swingarm service parts separately

A wheel or swingarm swap changes which application to check. The linked rear-wheel dampers supply four bushings, one set for the listed hub assembly. The front retainer references 44643-300-000. Identify the installed hub before treating either CB200T application as the required replacement.

Suspension & Wheel Parts questions

Are the fork seals specifically listed for 1976?

Yes. The Japanese-made seal set lists CB200T 1976 and measures 31 × 43 × 10 mm. Compare the installed forks, and confirm the unstated package count if servicing both legs.

Does the swingarm dust cap come as a pair?

The genuine Honda dust cap is sold individually. Its description gives varying quantities across Honda applications, without a CB200T-specific count. Check the fitted pivot or the correct parts diagram before ordering.

Does the shock-nut note mean two nuts are supplied?

Two nuts is the stated motorcycle requirement. It does not establish a two-nut pack. Confirm the supplied quantity before ordering for both positions, and compare reference 90309-315-000 with the fitted hardware.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1976 Honda CB200TK0

Votre panier

×