VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1974 Honda CB200 — Guidon et commandes

The 1974 CB200 handlebar selection offers black clamps and factory-style rubber grips for 7/8-inch bars. Measure the installed handlebar before ordering, particularly after a custom conversion. Check the clamp mounting arrangement separately from grip length, throttle clearance and the need for closed or open ends.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Guidon et commandes

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Type closed-end grips end detail 53165-342-670

Honda OEM Type Closed-End Grips ~ Replaces 53165-342-670

$17.95 USD
02-2423
Take your early-'70s Honda back to factory spec with these Honda OEM-Type Rubber Grips. Faithful replicas of the original factory grips, in black closed-end...
Honda CB750 CB550 black handlebar clamp set 2 7 8 in. 95014-22200

Honda CB Black Handlebar Clamp Set/2 ~ 7/8 in. ~ Replaces 95014-22200

$32.95 USD
73-1120
Secure your handlebars with confidence using this Black Handlebar Clamp Set. Designed for 7/8" bars, these clamps replicate the stock look and function while...
Comparer

1974 Honda CB200 · Handlebar Buying guide

Check the bar, clamp and grip interfaces

The black clamp set suits 7/8-inch bars, while the closed-end grips measure 135 mm long. Matching the diameter is the first check; mounting geometry and control clearance also matter.

Parts to consider

Honda CB Black Handlebar Clamp Set/2 ~ 7/8 in. ~ Replaces 95014-22200 Black handlebar clamp setBlack clamp set for 7/8-inch handlebars, referencing Honda 95014-22200. Compare the mounting arrangement and confirm supplied hardware before ordering.Voir la pièce Honda OEM Type Closed-End Grips ~ Replaces 53165-342-670 Closed-end rubber gripsBlack factory-style replica grips for 7/8-inch handlebars. The grips are 135 mm long and have closed ends.Voir la pièce

Inspect the clamp mounting arrangement

The clamp set references Honda 95014-22200 and is intended for 7/8-inch bars. Compare it with the installed upper mounting arrangement, especially if the triple clamp has changed. Replacement hardware is also offered separately; confirm the clamp package contents before adding fasteners.

Choose grips around the fitted controls

The black replica grips have closed ends and a 135 mm length. Check the bar and throttle sleeve arrangement, the available length beside the switches and any bar-end equipment. After replacement, confirm that the throttle moves freely without interference before riding.

Common buying questions

Will these parts fit a one-inch handlebar?

The listed grips and clamps are specified for 7/8-inch bars. Identify the installed diameter before buying; a custom one-inch bar arrangement needs parts designed for that size.

Do the grips work with bar-end mirrors?

The grips have closed ends. Compare the mirror’s attachment requirements with the grip design and choose a suitable arrangement rather than assuming a closed-end grip is ready for bar-end hardware.

Should I add new mounting bolts with the clamp set?

Inspect the existing fasteners and confirm what comes with the clamp set first. Replacement hardware is also offered separately. Match any new hardware to the installed mounting assembly rather than buying by bar diameter alone.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1974 Honda CB200

Votre panier

×