Pièces pour motos Honda
Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.
Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.
1972 Honda CB175K6 · Electrical Buying guide
The round-plug ignition switch has four wires in a six-hole connector. Charging choices divide into lead-acid and lithium-ion versions, so establish the battery requirements before comparing mounting space or wiring.
Round-plug ignition switchRound six-hole, four-wire connector; intended for the matching round harness connection.Voir la pièce
Lead-acid rectifier/regulatorRick’s Electric combination unit for standard lead-acid batteries; not compatible with lithium-ion batteries.Voir la pièce
Lithium-ion rectifier/regulatorLithium-ion-only unit with a 14 V ±0.2 set point; 54 × 57 × 35 mm. Battery compatibility must be checked.Voir la pièce
The standard Hot Shot unit is for lead-acid batteries and excludes lithium-ion use. The lithium-ion version excludes standard lead-acid batteries and has a 14 V ±0.2 set point. Compare the actual battery’s permitted charging specification before choosing, even when both products appear in the same model category.
The ignition switch is the round six-hole, four-wire type. Check the fitted harness connection and relevant circuit information before ordering it. The number of holes does not tell you the wire functions, and an altered loom needs its own connection check rather than an assumption based on appearance.
No. The products have different battery-chemistry restrictions. The lithium-ion unit’s 14 V ±0.2 set point also needs to match the battery manufacturer’s specification before it is selected.
It describes the connector housing and number of wires on this product. Compare both with the fitted loom, then verify the circuit connections; it is not a six-wire switch specification.
Identify the component, its connections and mounting arrangement on the motorcycle. Use the applicable wiring information to check compatibility instead of assuming that a part linked to the model will match a modified loom.
Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.
Sélectionnez le modèle exact et l’année pour affiner les résultats.
Choisissez votre modèle et l’année.