VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1970 Honda CB175K4 Super Sport — pièces de moto

Separate a starter-circuit purchase from a charging-system purchase on your 1970 Honda CB175K4. The solenoid and the two featured rectifier/regulators serve different jobs. Compare the existing connections, then use the installed battery’s requirements to choose the appropriate charging unit.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Démarrage et système de charge

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Nouveau
Honda CB750 CB550 CB500 CB350 starter solenoid relay 35850-371-670

Honda CB Starter Solenoid Relay ~ Replaces 35850-371-670

$21.46 USD
09-6582
Replace a failing starter solenoid with this Starter Solenoid Relay, replacing OEM #35850-371-670 / #35850-306-670 / #35850-HA7-670. Fits the SOHC CB750 lineup plus CB500/CB550K,...
Honda CB1100 CB1000 starter motor terminal rubber boot 32411-230-000

Honda CB Starter Motor Terminal Rubber Boot ~ Replaces 32411-230-000

$4.61 USD
73-0092
Replace your starter motor terminal cover with this Starter Motor Terminal (Cover) Rubber Boot, replacing OEM #32411-230-000.Key Features• Starter motor terminal rubber boot• Replaces...
Nouveau
Honda CB500 CB450 CB360 hot shot rectifier regulator 31400-292-670

Honda CB Hot Shot Rectifier / Regulator ~ Replaces 31400-292-670

$189.95 USD
24-2089
Upgrade your charging system with this Rick's Electric Hot Shot Rectifier/Regulator, replacing OEM #31400-292-670 / #31700-455-671 / #31700-292-008. Combination unit works with the stock...
Honda CB500 CB450 hot shot rectifier regulator lithium ion battery

Honda CB Hot Shot Rectifier/Regulator ~ Lithium Ion Battery Compatible

$169.95 USD
24-2014
Upgrade your CB450, CB500T, CB350, CB360, or small classic with Rick's Electric Hot Shot Lithium Ion Rectifier/Regulator. This combination unit works with the stock...
Comparer

1970 Honda CB175K4 · Starter & Charging Buying guide

Choose the circuit first, then its replacement component

The starter solenoid belongs to a different part of the electrical system from the charging unit. Identify the fault and battery specification before selecting components rather than replacing several pieces on suspicion.

Parts to consider

Honda CB Starter Solenoid Relay ~ Replaces 35850-371-670 Starter Solenoid RelayReplacement starter solenoid with CB175K catalog application. Compare its mounting, large cable terminals and control connections with the unit removed.Voir la pièce Honda CB Hot Shot Rectifier / Regulator ~ Replaces 31400-292-670 Lead-Acid Rectifier/RegulatorRick’s Electric combination unit for standard lead-acid batteries. Not compatible with lithium-ion batteries.Voir la pièce Honda CB Hot Shot Rectifier/Regulator ~ Lithium Ion Battery Compatible Lithium-Ion Rectifier/RegulatorRick’s Electric lithium-ion unit with a 14 V ±0.2 set point. Confirm that charging specification with the battery maker; not for standard lead-acid batteries.Voir la pièce

Pièces connexes : Starter terminal rubber boot

Keep solenoid selection connection-specific

Compare the featured solenoid’s mounting, large cable terminals and control connections with the old assembly and circuit information. The related rubber boot is a separate starter-terminal cover. Check its shape against the existing terminal rather than assuming replacement of the solenoid also renews terminal protection.

Verify the battery maker’s charging limits

The lithium-ion regulator specifies a 14 V ±0.2 set point and a 54 × 57 × 35 mm body. Confirm that charging setting suits the battery and check mounting space. The lead-acid alternative excludes lithium-ion, while the lithium-ion version excludes standard lead-acid batteries.

Starter & Charging questions

Can I choose a regulator before choosing the battery?

Choose them together against the battery maker’s charging requirements. The featured units have different battery restrictions, so a regulator selected for one battery type should not be treated as a universal option.

Does the lithium-ion label guarantee compatibility with every lithium battery?

No. The unit specifies a 14 V ±0.2 set point, which must be checked against the battery maker’s requirements. Also compare its 54 × 57 × 35 mm body with the available mounting space.

Can the solenoid be wired solely by matching its appearance?

Compare the cable terminals, control connections and mounting with the existing circuit information. Appearance and catalog application do not establish the terminal mapping, particularly after earlier wiring repairs or component substitutions.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1970 Honda CB175K4

Votre panier

×