VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1970 Honda CB175K4 Super Sport — pièces de moto

The 1970 Honda CB175K4 tank fittings offer three different repair paths: replace the cap, address the fuel valve, or renew the rubber supporting the tank at the rear. Check the fitted tank carefully because the available petcock differs in length from the original.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Réservoirs, bouchons, robinets et pièces

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB550 CB450 CB400 CB350 gas cap rubber seal 17631-329-003

Honda CB Gas Cap Rubber Seal ~ Replaces 17631-329-003

$7.95 USD
20-0097
Replace the broad-fitment gas cap rubber seal on many classic Hondas with this Gas Cap Rubber Seal, replacing OEM #17631-329-003. Exceptionally wide fitment covering...
Nouveau
Épuisé
Honda CB1000 CB900 CB750 fuel tank emblem clamp nut 87311-634-600

Honda CB Fuel Tank Emblem Clamp Nut ~ Replaces 87311-634-600

$6.25 USD
99-5267
Secure your fuel tank emblem properly with this Fuel Tank Emblem Clamp Nut, designed as a direct replacement for the original Honda hardware. This...
Nouveau
Honda CB450 CL450 CB350 CB72 gas tank filler cap 17620-402-000

Honda Gas Tank Filler Cap ~ Replaces 17620-402-000

$7.95 USD
07-4647
Restore an early-era Honda with this Chrome Gas Tank Filler Cap (with gasket installed), replacing OEM #17620-402-000 / #17620-402-010. Fits the oldest models in...
Nouveau
Honda CB175K CB200K fuel petcock 16950-336-005

1972-74 Honda CB175K / CB200K Fuel Petcock ~ Replaces 16950-336-005

$42.95 USD
07-4649
Replace a leaking or stuck fuel petcock with this Fuel Petcock, a direct replacement for OEM #16950-336-005. Stock fit for the 1972-73 CB175K and...
Honda CB175K rear fuel tank rubber holder 17613-246-000

Rear Fuel Tank Rubber Holder ~ Replaces Honda OEM 17613-246-000

$15.95 USD
33-0021
This aftermarket rear fuel tank rubber holder replaces Honda OEM 17613-246-000 on the listed Honda CB175K applications. It supports the rear of the fuel...
Comparer

1970 Honda CB175K4 · Fuel Tank Parts Buying guide

Check the tank at the cap, outlet and rear support

A new cap includes its gasket, the rear holder is an individual aftermarket cushion, and the petcock needs a clearance check. Choose only the components involved in the repair.

Parts to consider

Honda Gas Tank Filler Cap ~ Replaces 17620-402-000 Chrome Tank CapChrome fuel filler cap supplied with its gasket installed; replaces references 17620-402-000 and 17620-402-010.Voir la pièce Honda CB Gas Cap Rubber Seal ~ Replaces 17631-329-003 Fuel Cap SealSeparate rubber cap seal replacing reference 17631-329-003, with CB175K 1969–73 application.Voir la pièce Honda CB Fuel Tank Emblem Clamp Nut ~ Replaces 87311-634-600 Tank Emblem Clamp NutIndividual clamp nut replacing references 87311-634-600 and 87311-516-000. Count the emblem fixings needed before ordering.Voir la pièce

Pièces connexes : Longer Replacement Petcock · Rear Tank Support Rubber

Replace the cap or its seal

The complete cap is chrome and includes an installed gasket. For a serviceable cap with a worn sealing rubber, the separate seal offers a smaller repair. Compare the cap and tank sealing surfaces first, since a new rubber cannot correct unrelated damage to the retained parts.

Account for the smaller tank fittings

The linked rear support rubber replaces reference 17613-246-000 and is sold each, with a catalog application quantity of normally one. The featured tank emblem clamp nut is also sold individually. Count the attachment points needing hardware instead of applying the support-rubber quantity to emblem fixings.

Common ordering questions

Will this petcock match the original 1970 length?

It is longer than the original for the 1969–71 CB175K application. Compare the fitted tank, outlet arrangement and surrounding space before ordering the replacement.

How many rear tank support rubbers are supplied and required?

The aftermarket rear tank holder is sold individually. Its catalog application specifies normally one per motorcycle for CB175K 1969–71. Check the support on a modified tank installation separately.

Are the tank emblem clamp nuts a complete emblem fitting set?

They are sold individually. Count the missing or damaged fixings on the fitted emblem; the quantity needed for your repair is separate from the quantity supplied by one order.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1970 Honda CB175K4

Votre panier

×