Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

Consultation en cours Clignotants, supports, cabochons et réflecteurs

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB Stock Type Reflector ~ Replaces 33741-340-670

$21.46 USD
11-2303
Restore your mid-'70s Honda's stock reflectors with this Stock-Type Screw-On Reflector with a 6mm thread, replacing OEM #33741-340-670. Broad fitment covering the 1972-78 CB750...

Honda CB Turn Signal Lamp Gasket ~ Replaces 33443-268-671

$4.61 USD
11-2085
Service your early CB750 or classic twin turn signal with this Turn Signal Lamp Gasket, replacing OEM #33443-268-671. Pairs with our signal lens #11-2110...
Nouveau
Honda CB125S CB100K turn signal flasher relay 38310-428-671

1970-82 Honda CB125S / CB100K Turn Signal Flasher Relay ~ Replaces 38310-428-671

$15.82 USD
12-0104
Replace your CB100 or CB125S turn signal flasher with this Turn Signal Flasher Relay, replacing a range of OEM references (#38310-428-671, #38300-GF0-405, #38300-243-670, #38300-089-671,...

1978 Honda CB125S5 · Signal Seals & Reflectors Buying guide

Match the reflector attachment and the lamp seal

The reflector is a screw-on part with a stated 6 mm thread. The separate gasket references 33443-268-671; compare its profile with the signal housing, especially where lamps have been replaced.

Check the bracket as well as the reflector

The reflector’s stated 6 mm thread describes this replacement part. Compare it with the actual mounting point, including the attachment style and available clearance. If the bracket has been altered or replaced, resolve any thread uncertainty before ordering rather than relying on the model label.

Identify the signal housing you are keeping

Choose the gasket around the housing and lens that will remain on the motorcycle. Compare the existing seal’s profile with this replacement and use reference 33443-268-671 when asking for a match. An aftermarket housing needs its own compatibility check even on an otherwise unchanged bike.

Buying questions

Will this reflector fit a push-in mounting point?

This reflector is the screw-on type with a stated 6 mm thread. A push-in mounting arrangement is a different attachment, so confirm a suitable replacement for the bracket rather than assuming this one will attach.

How do I choose a gasket for replacement signal housings?

Identify the housing and lens first, then compare their sealing surface and the gasket profile. Reference 33443-268-671 identifies the offered replacement, but a changed housing needs a separate match before you order.

Does the reflector’s reference number mean it is genuine Honda?

This is a stock-type replacement for 33741-340-670. The reference identifies its replacement application, while the product is described as stock-type. If Honda-branded manufacture is required for the restoration, establish that separately before ordering.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité

Votre panier

×