Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

Consultation en cours Clignotants, supports, cabochons et réflecteurs

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB Stock Type Reflector ~ Replaces 33741-340-670

$21.46 USD
11-2303
Restore your mid-'70s Honda's stock reflectors with this Stock-Type Screw-On Reflector with a 6mm thread, replacing OEM #33741-340-670. Broad fitment covering the 1972-78 CB750...

Honda CB Turn Signal Lamp Gasket ~ Replaces 33443-268-671

$4.61 USD
11-2085
Service your early CB750 or classic twin turn signal with this Turn Signal Lamp Gasket, replacing OEM #33443-268-671. Pairs with our signal lens #11-2110...
Nouveau
Honda CB125S CB100K turn signal flasher relay 38310-428-671

1970-82 Honda CB125S / CB100K Turn Signal Flasher Relay ~ Replaces 38310-428-671

$15.82 USD
12-0104
Replace your CB100 or CB125S turn signal flasher with this Turn Signal Flasher Relay, replacing a range of OEM references (#38310-428-671, #38300-GF0-405, #38300-243-670, #38300-089-671,...

1976 Honda CB125S3 · Signal Gaskets & Reflectors Buying guide

Match the lamp seal and reflector attachment

The featured gasket references 33443-268-671; the screw-on reflector has a 6 mm thread. Use those separate details to compare the parts you are replacing without assuming a changed lamp is original.

Use the lamp reference as a starting point

The gasket references 33443-268-671. Compare that reference with your fitted lamp and inspect the gasket outline before choosing a replacement. If a previous owner changed the signal housing, identify that housing first rather than assuming every signal on the motorcycle uses the same seal.

Check reflector mounting separately

The reflector replaces 33741-340-670 and uses a 6 mm screw-on thread. Compare the receiving attachment and clearance around the bracket before ordering. If only one bracket has been replaced, inspect that side independently rather than assuming both sides retain the same fixing.

Buying questions

Will the gasket suit a replacement turn-signal housing?

That depends on the housing fitted. Compare its gasket shape and reference with 33443-268-671 before ordering. A motorcycle application alone does not confirm the seal used by an aftermarket lamp.

Which mounting detail matters when replacing the reflector?

This reflector has a 6 mm screw-on thread. Compare the bracket attachment and replacement reference 33741-340-670; a modified bracket may use a different mount even on the same model.

What should I check when replacing gaskets on several lamps?

Compare each fitted lamp housing and lens before combining the order. Previous repairs may have left different lamp assemblies on the motorcycle; confirm which positions match gasket reference 33443-268-671 rather than assuming every lamp uses the same seal.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité

Votre panier

×