VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1974 Honda CB125S1 — Électricité

For a lighting-hardware repair on the 1974 Honda CB125S1, first identify whether the worn part seals a signal lamp or attaches to a reflector bracket. The gasket and screw-on reflector need different mounting checks, especially on a previously restored motorcycle.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Électricité

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB550 CB500 CB450 CB400 rear brake light switch

Honda CB Rear Brake Light Switch

$10.33 USD
12-0008
Replace your rear brake light switch with this Rear Brake Light Stop Switch. Exceptionally broad fitment across the SOHC CB750 lineup and virtually the...
Honda CB750 CB550 CB500 CB450 CB400 reflector 33741-340-670

Honda CB Stock Type Reflector ~ Replaces 33741-340-670

$21.46 USD
11-2303
Restore your mid-'70s Honda's stock reflectors with this Stock-Type Screw-On Reflector with a 6mm thread, replacing OEM #33741-340-670. Broad fitment covering the 1972-78 CB750...
Solde
Honda CB750 CB125 CB100 rear brake light switch spring 35357-107-010

Honda CB750 / CB125 / CB100 Rear Brake Light Switch Spring ~ Replaces 35357-107-010

$7.00 $6.50 USD
You save $0.50
73-0848
Replace your rear brake stop switch spring with this Rear Brake Light Stop Switch Spring. This is the spring that attaches to the rear...
Honda CB750 CB450 CB350 CB200 CB175 front cable clip 45465-270-000

Honda CB Front Cable Clip ~ Replaces 45465-270-000

$7.00 USD
73-1116
Keep your wiring clean and secure with this Front Cable Clip, designed to hold the stop switch wires neatly against the front cable. Replaces...
Honda CB750 CB500 CB450 CB400 turn signal lamp gasket 33443-268-671

Honda CB Turn Signal Lamp Gasket ~ Replaces 33443-268-671

$4.61 USD
11-2085
Service your early CB750 or classic twin turn signal with this Turn Signal Lamp Gasket, replacing OEM #33443-268-671. Pairs with our signal lens #11-2110...
Nouveau
Honda CB900 CB200 CB175 CB125 5.25 in. battery band 95012-15001

Honda CB 5.25 in. Stock Type Battery Band ~ Replaces 95012-15001

$8.95 USD
99-4991
Upgrade or restore your motorcycle’s battery mounting system with this Stock Type Battery Band — a quality replacement designed to keep your battery securely...
Nouveau
Épuisé
Honda CB200 CB175 CB125 CB100 Denso ignition contact points 30202-107-004

Honda CB200 / CB175 / CB125 / CB100 Denso Ignition Contact Points ~ Replaces 30202-107-004

$8.95 USD
14-0004
Replace your Nippondenso-ignition points with this Denso Contact Points (1 piece), replacing OEM #30202-107-004 / #30202-216-004 / #30202-107-154.Important: these points are for Nippondenso ignitions...
Honda CB125S CB100K bar switch assembly left (clutch) side 35300-107-671

1970-74 Honda CB125S / CB100K Bar Switch Assembly ~ Left (Clutch) Side ~ Replaces 35300-107-671

$28.95 USD
12-0311
Fit the polished left-side handlebar controls on your CB100 or CB125S with this Bar Switch Assembly for the Clutch Side in polished finish, replacing...
Universal motorcycle spark plug cap LD05F

Universal Motorcycle Spark Plug Cap ~ LD05F

$8.95 USD
23-3118
Spark Plug Cap - LD05F for custom or restoration work on classic Honda CB motorcycles.  Key Features Aftermarket part Sold as: Each Fitment /...
Voir les détails
Nouveau
Honda CB125S CB100K ignition switch 35100-324-761

1970-75 Honda CB125S / CB100K Ignition Switch ~ Replaces 35100-324-761

$15.26 USD
29-0082
Replace your ignition switch with this Ignition Switch with 2 keys, 2 wires. Replaces OEM #35100-324-761 / #35100-111-671 / #35100-240-010 / #35100-324-000.Key Features• Ignition...
Comparer

1974 Honda CB125S1 · Lighting Hardware Buying guide

Separate the lamp seal from the reflector fitting

A sound signal housing can remain in use with the correct replacement gasket. A reflector instead needs a compatible threaded attachment. Inspect the affected assembly before choosing either small hardware replacement.

Parts to consider

Honda CB Turn Signal Lamp Gasket ~ Replaces 33443-268-671 Signal-lamp sealing gasketSeparate turn-signal gasket, replacement reference 33443-268-671. Match the installed lens and lamp housing.Voir la pièce Honda CB Stock Type Reflector ~ Replaces 33741-340-670 Screw-on reflectorStock-type reflector with a specified 6 mm mounting thread. Check the bracket and clearance before ordering.Voir la pièce

Inspect the signal before selecting its seal

Check the lens, housing and their sealing surfaces before choosing the separate gasket. Reference 33443-268-671 identifies the replacement seal. When a different signal assembly has been installed, match its gasket shape and attachment rather than relying on the motorcycle year alone.

Separate lamp sealing from reflector mounting

The signal gasket belongs to a matching lens and housing, while the screw-on reflector requires a suitable threaded bracket. Check these mechanical details independently. A replacement lamp or bracket fitted during restoration can change the part needed even though the motorcycle’s identity is unchanged.

Buying questions

Can a gasket refresh leave the existing signal lamp in place?

Yes, if the lens and housing are serviceable and use the matching seal. Compare their sealing shape with reference 33443-268-671 first; a damaged housing or changed lamp assembly may require a different repair.

Is a 6 mm mounting hole enough to confirm fit?

Check the bracket’s thread and available mounting clearance as well. The product specifies a 6 mm thread but does not state its pitch or usable length. Confirm those details against the installed bracket before ordering.

How should I plan an order for both sides of the motorcycle?

Identify the worn gasket and reflector positions separately, then confirm the supplied quantity for each product before ordering multiples. The two parts are separate choices; their appearance in one guide does not make them a paired kit.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1974 Honda CB125S1

Votre panier

×